ZBA Z-3060 User Manual - page 17
6-2. LED Indications
A dual color red-blue LED indicates operating status as follows:
LED status
Indication
Off
No power supplied to the scanner
Steady blue light
The scanner is on and ready to scan
One red flash
A barcode has been successfully decoded.
Steady red light
A barcode has been successfully decoded, but
the object is not removed from the scan window.
The scanner is in programming mode.
Flashing blue light
The scanner is in sleep mode.
Steady Purple light
This indicates the scanner has a motor or laser
failure. For motor failure, a periodic beep is
sounded. Return the unit for repair.
Alternate flashing red
and blue light
The scanner detects failing power. Please
check the power supply.
6-3. Beeps
A beeper gives audible feedback on scanner operation.
Beeps
Indication
One beep
A barcode has been successfully decoded.
Four beeps in series
This indicates the scanner passed the power on
self-test and is operating properly.
Two beeps: low-high
The scanner has entered programming mode.
Two beeps: same tone
Scanner has returned from programming to
normal mode.
Continuous tone
This is a failure indication. Return the unit for
repair.
11