Zebora YSW15 Quick Setup Manual - Pc (Windows Only) Setup
1. Go to www.zeboragroup.com, in “Download Center>>App Download”, download CMS
for Windows PC (Not Mac) and intall it. Click “CMSClient” icon from your desktop.
5
PC (Windows only) Setup
*You can only set up the PC after your camera is connected to Wi-Fi.
After log in CMSClient, if you cannot connect to the camera on PC:
Make sure that you input the correct camera password.
Log in CMSClient, click the “Playback” icon. In “Record ile type”,
choose “remote record ile”. Select the camera where your SD card locates in. Input the
begin and end recording time. Then click “Search”, and you can view the SD card records.
If you want t play the video in SD card (in camera) through CMSCline on PC:
5. There are multiple monitor screens. One screen is for one camera. Double click to get
full screen, and double click again to return.
4. Double click the device name under the device list on the left panel to start or stop
connecting to your camera. Click the four arrow panel on the left to control the camera.
3. After log in, click on the left to add device, then input your camera ID next to the
3C ID. The camera ID is located at the bottom of the camera (7 digits). Input your camera
password (If you don’t reset the password, it is “123”). Change the device name (Optional).
Click “OK”.
2. User: admin (case sensitive)
Password: null (no password required)