Zebora YSW15 Quick Setup Manual - Video Record Setup
6
Video Record Setup
For Cellphone/Tablet
*You need to have a micro SD card, it supports up to 64GB.
1. Insert the SD card into the slot behind the camera.
2. OPen “Yoosee”, Click “Settings” >>Date and Time. Set the camera “date and time” to
your local date and time, click “Apply”; Set the “Timezone” to your local timezone
(refer to Page 8), click “Apply”.
3. Go to “Settings” >> “Storage info” to “Format/Erase SD card” (a must).
4. After format SD card, remove the SD card and insert again (
Very important step
).
5. Click “Settings” >> “Record Settings”, turn on “Record Switch”.
6. Click “Playback”, you can play the recorded videos after 30~60 min (Video will be saved
automatically in “Playback” every 30 min).
Alarm Video Record Setup:
7. Go to “Settings” >> “Record Settings”. Choose “Alarm record”. Then go back to device list,
Click the unlock icon to arm the camera ..
For PC
*No micro SD card needed for recording.
1. Log in CMSClient, click and change the “File Save Path” for video recorded. Find the
ile where you saved the videos and play.
2. On the top panel of the video screen, you can choose the icon
for “talking, recording, snapshot” (from left to right).
* You should format the SD card on Yoosee for use. The “Record Switch” should be
off when you format the SD card.
* You should remove the SD card and insert again after format, or you cannot turn