Zebra CONCIERGE CC5000-10 Setup And Installation Manual - page 5
Setup and Installation Guide
5
• Do not use abrasive cleaners, waxes or solvents for cleaning.
• Do not operate the product under the following conditions:
•
Extremely hot, cold, or humid environments.
•
Near any appliance generating a strong magnetic field.
•
In direct sunlight.
Configuration Notes
The instructions, and screen captures in this guide describe default software
applications included with the Concierge CC5000-10. Customers and/or partners
may develop, and install additional custom software applications which run on the
Concierge CC5000-10. In addition, customers and/or partners may choose to add
their own hardware accessories prior to installation. Therefore, actual software
and hardware configurations may vary at individual sites. For more information go
to:
https://developer.zebra.com/community/technologies/concierge
.
Mounting the Concierge CC5000-10
Mounting brackets are not sold with the Concierge CC5000-10 system. Obtain the
appropriate mounting brackets to mount the Concierge CC5000-10 using a
mounting bracket which complies with the VESA mounting standard(100 mm x
100 mm)
The total weight of the Concierge CC5000-10 system (without additional
accessories, or modifications is 3 lbs/1.4 kg).
For safety purposes, mounting brackets should be certified to support the total
weight of the final system (including additional accessories, or modifications by
the customer).
NOTE
The instructions in this guide provide basic installation guidance for the
Concierge CC5000-105 system.
WARNING
!
Always utilize professional installers to safely install, mount, and
supply power to the Concierge CC5000-10. Always ensure
Concierge CC5000-10 mounting, and power routing meets regional
building codes.
IMPORTANT
The wall outlet must be located near the Concierge CC5000-10,
and be easily accessible.
MN001103A01a.fm Page 5 Monday, March 23, 2015 2:50 PM