Zebra EM220II Manual - page 11
EM220II
Rev. 1.02
- 11 -
Mobile Printer
iOS Utility Manual
3) View & Change the Settings
3-1) Printer Setting
- You can check and adjust the Power Saving Time, Emulation, Default Font,
Printing Speed, and Code Page settings.
Item
Description
Printer Density
Adjust the print density on the printer.
Printing Speed
Adjust the print speed.
Default Code Page
Change the default Code Page.
Single byte Font Selection
Set the Single byte font.
Font A: 12X24
Font B: 9X24
Font C: 9X17
Beep for paper end
Select whether to activate a beep sound when the
printer is out of paper.
Beep for low battery
Select whether to activate a beep sound when the
battery is low.
Double byte character mode
Select whether to activate the 2-byte character mode.
※ The double byte font is available to select on the
printer that supports Chinese, Japanese and
Korean.
Auto Power Off Time
Set the idle time before the printer automatically turns
off.
Auto Power Saving Time
Set the idle time before the printer goes into power
saving mode.
3-2) MSR Configuration
- You can check and adjust the MSR configurations.
Item
Description
MSR Trigger Mode
Configure the MSR Trigger Mode.
MSR Data Mode
Configure the MSR Data Mode.
MSR Sentinel Characters
Configure the MSR Sentinel characters.
3-3) Set Status of printer
- Tap this button to apply new settings to the printer, otherwise they will be lost.
3-4) Get Status of printer
- Check the status of the printer.
4) Quit
Tap the “Done” button to return to the main screen.