Zebra QL Series User Manual - Desk Stand

42

QL Series User Guide

Desk Stand

Refer to Figure 16. To use

the Desk Stand:  Slide the

printer onto the Desk stand

as shown.  The printer’s belt

clip will hook onto the Desk

Stand as shown and retain it

in place.  Ensure that the

clip is securely attached to

the Stand and the media

compartment of the printer

is seated securely in the

stand.

Refer to the Specifications

section for Desk Stand part

numbers.

Holes are provided to per-

manently attach the Desk

Stand to the work surface.

The charger and data I/O ca-

bles may be plugged into

the printer in the usual man-

ner.

Refer to the section on using

the chargers for more

information.

Desk Stand

Hook

Belt Clip

over the

Stand

Figure 16: Optional Desk Stand