Zektop SoloCAT Z57-1.3 User Manual - page 7
Front Panel — Receiving Unit Z57 [RX]
HDMI OUT: Connect to a HDMI™ display with a HDMI™ male-male cable here.
Signal Level: Adjust the 8-level equalization control to the received HDMI™ signals. The HDMI™ signal level varies from 0
(strongest) to 7 (weakest) for respective transmission length from longest possible range to short distance. Please adjust
the signal level from 7 to 0 and stop turning the rotary switch whenever the audio/video is playing normally. Inappropriate
signal level setting may cause overpowering issue that would shorten the product life significantly!
Rear Panel — Receiving Unit CV‐57G[RX]
HDMI Signal IN: Plug in a Cat-5/5e/6 cable that needs to be linked to the RJ-45 connector of the transmitting unit Z57 [TX].
+5V DC: Connect to 5V DC power supply.
~ 6 ~