Zenith XBV243 series Service Manual - Chassis
VR168 - 923-03485
2-3
D35E COMBO - CHASSIS
CHASSIS
CABINET DISASSEMBLY
CAUTION BEFORE SERVICING
Electronic parts are susceptible to static electricity and
may easily be damaged. Follow proper grounding
procedures.
Many screws are used inside the unit. To prevent missing,
dropping, etc. of the screws, always use a magnetized
screw driver in servicing. Several kinds of screws are used
and some of them need special cautions. That is, take
care of the tapping screws securing molded parts and
fine pitch screws used to secure metal parts. If they are
used improperly, the screw holes will be easily damaged
and the parts can not be fixed.
CABINET DISASSEMBLY
TOP CASE
1. Remove 7 screws (A). (See Fig. 2-1)
2. Pull the top case back and up, in the direction of
the arrow, to disengage it from the front panel.
Fig.
2-1
TRAY DOOR
1. Eject the disc tray.
2. Lift up the tray door in the direction of the arrow.
Fig.
2-2
FRONT PANEL
1. Eject the disc tray. (See Fig. 2-2)
2. Remove the tray door. (See Fig. 2-2)
3. Depress the 7 embossed tabs (see fig. 2-3) and
remove the Front panel.
Fig. 2-3
Tab
Tabs
Tabs