Zenith XBV243 series Service Manual - Mechanism - Vcr
Other manuals for XBV243 series:
Installation And Operating Manual, Installation And Operating Manual, Installation And Operating Manual
of
110
MECHANISM - VCR
VR168 - 923-03485
4-2
D35E COMBO - SERVICING
DRUM ASSEMBLY
1) Unplug the Drum FPC Connector.
2) Remove three Screws (S1) on the bottom side and
separate the Drum assembly.
3) Unhook (H1), (H2) and separate the Holder FPC and
Cap FPC. Also see figure (B1).
DRUM MOTOR
1) Remove two Screws (S2) and disassemble the Sta-
tor of the Drum Motor.
2) Remove two Screws (S3) and separate the Rotor of
the Drum Motor from the Drum Sub assembly.
NOTE: When reassembling, check to ascertain that Carbon
Brush is in position.
Fig. B-1
Holder
FPC
Drum
FPC
Cap
FPC
Reversed Direction
(S3)
(S2)
(S2)
(S3)
(A)
Stator
Carbon Brush
Drum Motor
Rotor
Drum Sub Assembly
Drum FPC
(S1)
(S1)
(S1)
Holder FPC
H1
H2
Fig. A-1