3Com 3C3FE575CT User Manual - page 13
Uninstalling the Card
13
Uninstalling the Card
Sometimes previous or unfinished installations leave problems that affect PC Card
operation. If the PC Card installation is unsuccessful for any reason, your best
course may be to remove the PC Card and its software and repeat the installation
procedures with a fresh installation of the operating system. Possible problems
may be indicated if:
■
The PC Card is not working.
■
Windows 2000 is not detecting the PC Card.
■
The system issues a warning tone at startup.
If you are having any of these problems:
1 Open Control Panel/System/Device Manager.
2 Select the FE575C-3Com 10/100 LAN CardBus-Fast Ethernet components and
click Remove.
3 Remove the PC Card from the PC Card slot.
4 Reboot and reinstall the PC Card.
Need to force speed
and duplex settings.
In most cases, the automatic settings work fine. However, if you to
need to force speed or duplex settings to match those of an attached
device:
1 Open My Computer/Control Panel/Network and Dial Up
Connections.
2 Choose Local Area Connection.
3 FE575C-3Com 10/100 LAN CardBus-Fast Ethernet should appear in
the Connect using: box.
4 Press the Configure button.
5 From the generated dialog box, choose the Advanced tab.
6 Select Network Link Selection and choose the correct speed.
Symptom
Solution (continued)