3Com 3C3FE575CT User Manual - page 20
20
C
HAPTER
4: S
ETUP
FOR
W
INDOWS
95
6 In the Select Device window, click Have Disk.
7 Insert the LAN Installation Disk into the floppy drive and click OK.
8 Select FE575C-3Com 10/100 LAN CardBus-Fast Ethernet Manual Load and click
OK to copy the PC Card files to your notebook.
If you are prompted for the LAN Installation Disk during installation, make sure
that a: is the designated path. If during installation, the 3Com driver cannot be
found, enter a:\ to point Windows to the LAN Installation Disk.
9 In the new hardware Wizard window, click Next.
10 If prompted, insert the Windows 95 CD or enter the location on your notebook
where the Windows 95 files reside. Typically, this location is
C:\WINDOWS\OPTIONS\CABS.
Click OK to copy the files needed for the Ethernet interface.
If during installation, the 3Com driver cannot be found, enter a:\ to point
Windows to the driver.
Please wait while Windows checks your current network configuration. The
required time depends on your settings for network software components.
A dialog box appears stating that Windows has finished installing the software
that your new hardware device requires.
11 Click Finish to complete installation and remove the LAN Installation Disk.
12 Click yes to reboot the notebook.
When the software restarts, log on to your network using the user name
and password.
Windows 95 OSR 2
1 Insert the PC Card as described in “Installing the PC Card”.
2 Turn the notebook on.
The New Hardware Found window appears briefly.
The Update Device Driver Wizard window states that Windows has detected the
PCI Ethernet Controller.
3 Insert the LAN Installation Disk and click Next to begin driver installation.
The following message appears:
“Windows found the following updated driver for the device: FE575C-3Com
10/100 LAN CardBus- Fast Ethernet”.