3Com 3C3FE575CT User Manual - page 21
Confirming Installation
21
4 Click Finish to accept the driver.
If you are prompted for the LAN Installation Disk during installation, make sure
that a: is the designated path. If during installation, the 3Com driver cannot be
found, enter a:\ to point Windows to the LAN Installation Disk.
If prompted, insert the Windows 95 CD. You can specify a location on your hard
disk where the Windows 95 files reside. Typically, this location is
C:\WINDOWS\OPTIONS\CABS. Click OK to copy the files needed for the
Ethernet interface.
Please wait while Windows checks your current network configuration. The
required time depends on your settings for network software components. If you
are prompted for Computer name or Workgroup name, enter the appropriate
name and click OK. If you have difficulties, see your network administrator.
A dialog box appears stating that Windows has finished installing the software
that your new hardware device requires.
5 When Windows 95 prompts whether to reboot the notebook, remove the LAN
Installation Disk from the floppy drive and click Yes.
Confirming
Installation
1 Double-click the My Computer icon.
2 Double-click the Control Panel icon.
3 Double-click the System icon. The System Properties box details your system setup.
4 Click the Device Manager tab.
5 Click the + sign next to Network Adapters. The display should show the
FE575C-3Com 10/100 LAN CardBus-Fast Ethernet, confirming successful installation.
6 Double-click FE575C-3Com 10/100 LAN CardBus-Fast Ethernet to display a
description of the PC Card and its current status. It should display “This device is
working properly.”