3D Systems CUBE User Manual - page 14

10

3D Systems, Inc

.

4 .  Fold the sides inward and remove the lower insert from the printer . 

5 .  Manually raise the print platform (A) and remove the spacer (B) from the printer .

6 .  Open the accessories box and unpack the material cartridge(s)*, the USB mass 

storage device, the power supply and cord, and the bottle of Cube Glue .

NOTE: Keep all packing materials for future repacking .

NOTE: *Depending on your configuration, you may receive 1 or 2 

cartridges with your printer .

7 .  Connect the power supply cable to the power inlet port (A) on the printer .

NOTE: Ensure the connection is secure . The cable should lock in 

place . To remove the cable, pull back on the outer cable end and 

carefully pull it out from the printer .

A

A

B