3D Systems CUBE User Manual - page 20
16
3D Systems, Inc
.
4 . Before installing cartridges, select the cartridge icon or select
START
to begin the
process of installing your print cartridge .
NOTE: The printer will begin to heat . Wait until the printer has
finished heating and then follow the user prompts in the touchscreen
menu .
5 . Insert the print jet (from the cartridge that will be mounted on the left side of the
printer) into the left print jet opening on top of the printer .
6 . Rotate the print jet clockwise until the dots (A) align . Select the
checkmark
to
continue
NOTE: As you rotate the print jet, ensure the print jet tube is tucked
under the top of the printer cover .
7 . Mount the cartridge on the left side of the printer and select the
checkmark
to
continue .
NOTE: It may become necessary to slightly rotate the cartridge to
seat it properly .
A