3DR Solo User Manual - 5.2  Cable Cam

27

Figure 5.1.2.1: App - Selfie Control

To control Selfie using the controller, use the right stick to move Solo forward and back along the Selfie path. Press 

Pause at any time to stop Solo; press Fly to exit to standard flight. 

Figure 5.1.2.2: Controller - Selfie Control

5.1.3 

Settings

To access the settings from the in-flight Selfie interface, select the option icon with the three dots in the bottom-

right. Use the sliders to adjust distance out, altitude up, and cruise speed. Select Selfie How-To for instructions and 

tips.

Figure 5.1.3.1: App - Selfie Settings

5.2  Cable Cam

Cable Cam creates a smooth shot by flying Solo along an invisible cable between any two preset points.

5.2.1 

Starting Cable Cam

Press A on the controller, or select Cable Cam from the Shot List on the app. Both devices will prompt you to fly 

Solo to your first point and press A to save it as the first Cable Cam point. Then fly to your second point and press B 

to save the second point. Try adding a difference in altitude or orientation between the two points for an impressive 

cinematic effect.

Move along 

flight path