3DR Solo User Manual - page 33
28
Figure 5.2.1.1: App - Cable Cam Setup
5.2.2
Cable Cam Operation
To control Cable Cam through the app, tap the right arrow to move towards point A and tap the left arrow to move
towards point B. Cable Cam’s default cruise speed is set to 9 mph (4 m/s).
Figure 5.2.2.1: App - Cable Cam Controls
To operate Cable Cam using the controller, move the right stick to the left to fly towards point A and to the right to
fly towards point B. Release the right stick to pause along the cable. Use the left stick to temporarily override the
camera and look left and right. Press Pause at any time to stop Solo; press Fly to exit to standard flight.
Figure 5.2.2.2: Controller - Cable Cam Controls
5.2.3
Cable Cam Settings
To adjust Cable Cam’s options, select the settings menu in the bottom-right corner. Automatic view lock prevents
left-stick camera control during Cable Cam. Choose Fly Counterclockwise and Fly Clockwise to customize the
direction Solo rotates between your A and B points. Select Cable Cam How-To for instructions and tips.
Figure 5.2.3.1: App - Cable Cam Settings
Always ensure that there is a clear path between points A and B before
starting Cable Cam.
Camera
Cable