3M Accuspray Owner's Manual - page 3
EC Declaration of Conformity
Manufacturers Name:
Manufacturers Address:
, Automotive Aftermarket Division
3M Center, Building 223-6N-01
St Paul, MN USA 55144-1000
Does hereby declare under our sole responsibility that the machinery described below complies with those
applicable essential health and safety requirements of the Machinery Directive 2006/42/EC; together with
all amendments to date.
Description:
3M™ Accuspray™ ONE Spray Gun
Model Number:
16579, or “HGxy”, where xy is a 2-digit code referring to the included spray head orifice size
Serial Number Range:
Year of manufacture, as marked: “20ab”–to–”2099”, where “ab” is any 2-digit number.
The following standards have either been referred to, or complied with, in full or in part as relevant:
EN ISO 12100:2010
Safety of machinery. General principles for design. Risk assessment and risk
reduction
EN 1953:2013
Atomizing and spraying equipment for coating materials. Safety requirements
EN 14462:2005+Al:2009
Surface treatment equipment. Noise test code for surface treatment equipment
including its ancillary handling equipment. Accuracy grades 2 and 3.
Full Name of responsible person:
Mark N. Schaeffer
Position: Technical Director
Signature:
........................
Date:
..................................
St. Paul, Minnesota, USA
Full Name and address of individual responsible to compile technical file within the Community:
Dr. Phil J. Bouie, Country Technical Mgr., Industrial Business Sponsor, 3M United Kingdom PLC,
Ratcliffe Road, Atherstone, Warwickshire, CV9 1PJ, England, United Kingdom, +44-1827-710373
PDF Scaled at 100.0%