3M Accuspray Owner's Manual - page 5
4
3M™ Accuspray™ Spray Gun Safety Statements
Read, understand and follow all safety information contained in these instructions prior to set up and operation
of any 3M™ Accuspray™ Spray Gun. Retain these instructions for future reference. Refer to the applicable Safety
Data Sheet and material container label for each material to be sprayed before using this 3M equipment.
Intended Use:
The 3M™ Accuspray™ Spray Gun and Atomizing Heads are intended for professional use only They are intended to deliver
the desired quality, atomization, and rate of application for larger production needs
The spray gun must be set up as specified in the 3M™ Accuspray™ Spray Gun Owner’s Manual. They are intended
for use in a professional/industrial environment only. They have not been evaluated for other uses.
Explanation of Safety Symbols Consequences
WARNING:
Indicates a hazardous situation, which, if not avoided, could result in death or serious injury
CAUTION:
Indicates a hazardous situation, which, if not avoided, could result in minor or moderate
injury
WARNING
To reduce the risks associated with all hazards related to the use of this product:
•
Read, understand and follow all safety statements in applicable equipment owners’ manuals to avoid possible
safety hazards
•
This equipment is to be used only by professionals familiar with the possible applicable safety hazards
•
Do not use this product around unsupervised children
•
Never modify any part of this product
•
Always comply with local, state, and national codes governing ventilation, fire protection, operation, maintenance,
and housekeeping
To reduce the risks associated with chemical exposure:
•
Never point a spray gun at anyone else or place any part of your body in front of the atomizing head
•
Before use check spray equipment for damage and proper function Repair/replace worn, damaged or
malfunctioning components
•
Always wear appropriate personal protective equipment for eye, skin, respiratory and hearing protection per the
applicable MSDS and material container labels at all times when spraying
To reduce the risks associated with fire and explosion:
•
Must maintain adequate ventilation per applicable MSDS and material container labels for each material being sprayed
in the work area
•
All ignition sources such as smoking must be kept out of the spray area
•
Always maintain a readily available, approved fire extinguisher or other approved fire fighting equipment in the
spray area
To reduce the risk associated with noise:
•
Always wear hearing protection while using the spray gun
PDF Scaled at 100.0%