3M Accuspray Owner's Manual - page 7
6
Spray Gun Overview
3M™ Accuspray™ Spray Guns were designed from the inside out for the effective, efficient, and economical application of
paints, adhesives, coatings and finishes This spray gun has a large spray pattern with very low overspray The soft, tight,
adjustable pattern with complete atomization results in a high finish quality and absolute control Each ultra-light weight
spray gun is designed for easy handling, reliability and durability and for minimum maintenance costs Combine your
3M™ Accuspray™ Spray Gun with the 3M™ PPS™ Paint Preparation System and enjoy additional savings of time and
cleaning solvents
3M™ Accuspray™ Spray Gun is for professional use only Hazards can occur from equipment misuse Any misuse of the
equipment or accessories, such as over pressurizing, modifying parts, using incompatible chemicals and fluids, or using
worn or damaged parts can cause serious bodily injury, fire, explosion or property damage
Read and follow all Safety
Statements and Instructions.
CONTENTS
Unpacking
Remove the components from the box Inspect for concealed damage and/or missing items If you discover any damage
and/or missing pieces, contact your distributor immediately
Your 3M™ Accuspray™ Spray Gun Kit could include one or more of the following, depending on the kit that was purchased:
•
1 Spray Gun Body
•
1 Air Flow Control Valve
•
1 2 mm atomizing head
•
1 3 mm atomizing head
•
1 4 mm atomizing head
•
1 8 mm atomizing head
•
2 0 mm atomizing head
•
10 Color Identification Clips (2 each of 5 colors)
•
PPS™ Standard Size Mixing Cup and Collar
•
PPS™ Standard Size Lids and Liners
•
PPS™ Sealing Plugs
•
PPS™ Generic Mix Ratio Insert
•
Spray Gun Hanger
3M™ Accuspray™ Spray Gun
The 3M™ Accuspray™ Spray Gun features a black composite* body,
13 scfm (370 5 L/min) air consumption, 1/4” (1/4” BSP) air inlet and 20
psi (1 4 bar) maximum inlet pressure with full trigger pull ** This spray
gun is for use with compressed air systems
* Product material compatibility information available upon request
** Maximum inlet pressure at a 2:1 reduction ratio will yield
approximately 10 psi (0 69 bar) at the air cap
PDF Scaled at 100.0%