3xLogic VX-2S-CPIR-W User Manual - page 14
USER MANUAL| VX-2S-CPIR-W
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
14
12. If successful, a page will deploy with the camera’s serial number automatically entered. You will now be
prompted to enter the cameras login credentials (default username/password: admin/12345). Enter the
credentials and tap Continueto login to the device and begin camera configuration. Skip to
for remaining instructions on camera configuration.
VSX SETUP TOOL - WIRED CONNECTION SETUP
To setup a camera with wired connection using the 3xLOGIC VSX Setup Tool,follow the below steps:
1. Unbox and install the camera to your network specifications.
2. Connect the camera so it has external internet connectivity.For information on wired network
connections, see
Wiring over LAN
.
3. Tap the Setup New Cameras at Site button.
4. Fill in Installer Information and tap Continue.
5. Fill in Company information and Tap Continue.
6. On the Camera Type screen, select Multi-Sensor Camera then tap Continue.
7. On the Network Connection Type page, select Wired Connection and tap Continue.
8. Select Scan QR Code (recommended) and scan the QR label (affixed to the back of the camera) to load
the camera information into the app. Alternatively, click Manual Input and fill in the available Alias
/Serial No. field with the camera’s serial number.
9. The camera’s serial number will now be entered and you will be prompted to enter the camera’s login
credentials (default username/password: admin/12345). Enter the credentials and tap Continue to login
to the device and begin camera configuration. Proceed to
for remaining
instructions on camera configuration.
VSX SETUP TOOL - CAMERA SETUP
Upon initial login, you will be required to change the camera’s default login credentials as a security precaution. To
begin:
1. Enter a new Username and Password. You will be required to enter the password in a second field for
confirmation. Click Continue to assign the new credentials. A live video preview will now deploy on your
screen.
2. Position the camera to achieve the field-of-vision as required by your site specifications. When you have
achieved the desired field-of-vision, tap Continue. The Camera Settings page will load.
3. Enter a Camera Name. The camera will be referenced by this name throughout the VIGIL VMS (VIGIL
Client, VCM, View Lite II, etc…).
4. Enter a custom VIGIL Connect Alias. The camera’s serial number will be used by default.
5. Select a Time Zone.