3xLogic VX-2S-CPIR-W User Manual - page 39
USER MANUAL| VX-2S-CPIR-W
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
39
7.4 Operating PTZ Control
In the live view interface, you can use the PTZ control buttons to issue pan/tilt/zoom commands to
applicable cameras.
Before you start:
To utilize PTZ control, the camera connected to the network must support the PTZ function or a
pan/tilt unit has been installed to the camera. Please properly set the PTZ parameters on RS-485
settings page referring to Section 8.2 - RS-485 Settings.
PTZ CONTROL PANEL
Steps:
1. On the live view page, click to show the PTZ control panel or click to hide it.
2. Click the direction buttons to control the pan/tilt movement.
Figure 7-3
PTZ Control Panel
3. Click the zoom/iris/focus buttons to utilize lens control.
There are 8 direction arrows (
) in the live view window
when you click and drag the mouse in the relative positions.
For cameras which support lens movement only, the direction buttons are invalid.
Icon
Description
Zoom in/out
Focus near/far
Iris +/-
Light on/off
Wiper on/off
,
, , ,
,