4xem WLPTZ User Manual - page 16
- 12 -
Add Password to Prevent Unauthorized Access
The default Administrator’s password is blank and the Network Camera initially will
not ask for any password. The Administrator should immediately implement a new
password as a matter of prudent security practice. Once the Administrator’s
password is saved, the Network Camera will ask for the user’s name and password
before each access. The Administrator can set up a maximum of twenty (20) user
accounts. Each user can access the Network Camera except to perform system
configuration. Some critical functions are exclusive for the Administrator, such as
system configuration, user administration, and software upgrades. The user name
for the Administrator is permanently assigned as “root”. Once the password is
changed, the browser will display an authentication window to ask for the new
password. Once the password is set, there is no provision to recover the
Administrator’s password. The only option is to restore to the original
factory default settings.