4xem WLPTZ User Manual - page 31
- 27 -
Build a Security Application
The Administrator can combine
options on the application page
to perform many useful
security applications. There are
two trigger sources coming
from attached devices, such as
for motion detection. There are
also two kinds of actions
responding to such events,
including uploading snapshots
over the Internet and driving
other attached devices. To
upload the snapshots, the User can choose either email or FTP according to user’s
needs. Both e-mail and FTP use the network settings on the Mail & FTP page. Refer
to the definition section for detail configuration.
1. Click on “Configuration” on the
homepage,
2. Click on “Application” in the left
column,
3. Check the weekdays as you need and
give the period of "Snapshots begin"
time and "Snapshots end" time to
monitor the triggering conditions every
day,
4. Check the “Event operation”. The
triggering condition can be set to
detected motion or status of the attached
device,
5. Set the delay before detecting next event to avoid continuous false alarms