4xem WLPTZ User Manual - page 25
- 21 -
Somewhere Between Real-time and Clear Images
If you have a broadband network, set “Fix quality” at ”Normal” or better, rather than
setting “Fix bit rate”. You can also fix the bandwidth according to your actual
network speed and adjust the frame rate. Start from 30 fps down for best results
but not below 15 fps. If the image qualities are not improved, select a lower
bandwidth setting.
Select for Motion JPEG
The Network Camera with Pan/Tilt/Zoom is a camera with dual video codec, they’re
MPEG4 and MJPEG. If MJPEG is selected, the camera will transmit video data in JPEG
format. Therefore, it requires higher bandwidth to view smooth video. General
speaking, each normal sized JPEG image would be 3k~12k bytes, depending on the
selected video quality and contents. Together with the frame rate selected, the
administrator can control the bandwidth of each connection.