A&D Lifesource UC-321 Instruction Manual - Display Symbols
Display Symbols
-3-
Caution
❒ Insert the battery with the positive (+) and negative (-) terminals properly
aligned with the corresponding symbols in the Battery Compartment.
❒ Improper installation of the batteries may cause battery leakage.
❒ Replace four batteries with new ones, when symbol is displayed.
❒ Do not mix used and new batteries. It may result in damage to the scale or
shorten battery life.
❒ The battery life is dependant upon the environmental temperature, battery
performance and usage.
❒ Remove the batteries from the battery compartment, when the scale is not
to be used for a long time. They may leak and damage your scale.
❒ The battery life of accessory batteries may be shorter than new ones.
Steps for Installing (or Replacing) Batteries
1. Remove the battery compartment cover on the
underside of the scale by gently pushing on the
arrow and lifting the cover backward.
2. Place four new batteries with positive (+) and
negative (-) terminals properly aligned with the
corresponding symbols in the battery compartment.
3. Replace the cover by sliding it into the compartment
and gently pressing into place.
Installing (or Replacing) Batteries
This symbol is displayed, when the measurement display is stable.
Low battery mark. If this mark is displayed, replace the batteries
with new ones.
The arrow symbol indicates the function that is displayed.