A&D Lifesource UC-321 Instruction Manual - The Target Function
The Target Function
-8-
The difference between the preset target weight and the current weight can
be displayed.
Presetting a New Target Weight
1 Set the slide switch to "TARGET".
2 Gently press an hold the measurement switch.
The last preset target weight is displayed.
3 Gently press the measurement switch and hold
until the desired target weight is displayed.
Press and hold the measurement switch, the
value will increase continuously. By releasing and
pressing the switch continuously, the target weight
can be adjusted by 1/10 lb (0.05kg) increments.
4 When the desired target weight is displayed,
release the measurement switch.
When the new target weight value has remained
visible for approximately five seconds, the scale
will automatically power off.
Slide Switch
Measurement Switch