A&D Lifesource UC-321 Instruction Manual - The Memory Function
The Memory Function
-6-
Up to 31 weight data measurements can be stored in memory. The 32nd data
measurement is stored by deleting the oldest stored measurement.
The difference from the last stored measurement and the current measure-
ment is automatically displayed.
Storing a Current Weight.
1 Set the slide switch to "MEMORY".
2 Press the measurement switch gently.
The last weight is displayed.
3 Step on your scale.
Gently step on your scale after the 0.0 lb
(0.00kg) and stable symbol are visible.
When the stable symbol disappears, the
measurement sequence has initiated. Stand
still during the measurement. When the dis-
play 0.0 lb (0.00kg) has remained visible for
approximately ten seconds, the scale will
automatically power off.
4 The weight can be read after displaying
the stable symbol .
5 Step off the scale.
6 Weight Data Measurements are stored in
memory and the difference from the last
stored measurement and the current
measurement is automatically displayed.
When the display 0.0 lb (0.00kg) has
remained visible for approximately five
seconds, the scale will automatically
power off.