A&D Lifesource UC-321 Instruction Manual - 3 Step On The Scale.
Manual is about: Precision Health Scale ProFIT / IntelliSCALE
of
12
-9-
Comparing a Current Weight with a Preset Target Weight
1 Set the slide switch to "TARGET".
2 Press the measurement switch gently.
The stored target weight is displayed.
3 Step on the scale.
Gently step on your scale after the
0.0 lb (0.00kg) and stable symbol
are visible. Stand still during the
measurement. (If you do not step on
the scale, the display 0.0 lb (0.00kg) will
remain visible for approximately ten
seconds, then the scale will
automatically power off.)
4 The difference between the preset
target weight and the current weight
is displayed.
The difference, +/- 0.0 lb (0.00kg) will
remain visible for approximately five
seconds, then the scale will automatically
power off.