A-Dec 500 Installation Manual - page 11
A-dec 500 12 O’Clock Delivery System Installation Guide
86.0466.00 Rev E
11
Factory Presets
Chair positioning, light functions, cuspidor functions,
handpiece behavior and speed are factory preset. Table 1
lists and defines the Standard Touchpad factory presets.
Table 1. Standard Touchpad Factory Preset
Table 2. Deluxe Touchpad Additional Factory Presets
Program the Touchpad
Use the Program button to:
• Override or reset factory preset functions on either
the Standard or Deluxe Touchpad.
• Customize handpiece operations on the Deluxe
Touchpad.
Program the Deluxe Touchpad
In addition to the programmable features of the
Standard Touchpad, the Deluxe Touchpad allows
customizing of multiple users, the air/water coolant,
electric handpieces, scaler, endodontics functions, and
auxiliary equipment.
Table 2 lists and defines the additional presets on a
Deluxe Touchpad. For more information on customizing
touchpad settings, refer to the A-dec 500
®
12 O’Clock
Delivery System Instructions For Use (86.0605.00)and the
A-dec
®
EA-51LT Electric Motor Instructions for Use
(86.0616.00).
Touchpad Troubleshooting
The Deluxe Touchpad displays system and handpiece
status to assist you in troubleshooting issues.
System Status Icon
The A-dec logo on the touchpad indicates the system
status:
• Solid blue—normal operation and power is on.
• Blinking— chair stop plate or cuspidor limit switch is
active. The icon returns to solid blue once you
remove any obstructions.
• Double Blink—a jumper on the chair circuit board is
still in the factory default position.
Touchpad Help Messages
Help messages are displayed on the deluxe touchpad
screen to provide information about why an operation is
disabled. For information on help messages, refer to the
Regulatory Information, Specifications and Warranty
document located in the Document Library at
www.a-dec.com.
Icon
Preset Definition
Bowl rinse for 30 seconds.
Cup fills for 2.5 seconds.
Position 0—Chair moves to entry/exit position,
dental light turns off.
Position 1—Chair moves base up and back up,
dental light turns on and remains on.
Position 2—Chair changes base up and back up,
dental light turns on and remains on.
Position 3—Chair moves to x-ray/rinse position,
dental light turns off. Button toggles between
x-ray/rinse position and chair’s previous position.
Touchpad
Icon
Preset Definition
• Air coolant on for all memory buttons
(Standard Mode)
• Air coolant off for all memory buttons
(Endodontics Mode)
• Water coolant on for all memory buttons
(Standard Mode)
• Water coolant off for all memory buttons
(Endodontics Mode)
• 2,000 RPM electric motor speed
• 25% scaler throttle level
• 10,000 RPM electric motor speed
• 50% scaler throttle level
• 20,000 RPM electric motor speed
• 75% scaler throttle level
• 36,000 RPM electric motor speed
• 100% scaler throttle level