A-Dec 585 Installation Manual - Determine The Mounting
A-dec 585 Wall Monitor Mount Installation Guide
2
86.0058.00 Rev E
Determine the Mounting
Location
The mounting location must allow the
backboard to be securely mounted to
permanent structural members, such as a
wall with studs.
The optimal backboard location:
• 55" from the floor to the bottom of
the backboard
• 60" recommended distance from a
12 o’clock wall or back of the 12 o’clock
cabinet to the edge of the backboard
• 51" minimum clearance from any
perpendicular wall to the edge of
the backboard
Determine the Stud
Spacing
Determine the stud spacing in the wall to
which you are installing the monitor mount.
The wall mount must have all four lag
screws installed into the wall studs.
If the stud spacing is not 16", you must
create a support structure.
WARNING
Do not use hollow wall
fasteners that rely on non-structural
elements. A-dec is not responsible
for any damage resulting from the
use of hollow wall fasteners.
Consult a licensed professional,
such as a structural or architectural
engineer, for mounting to metal
studs or a masonry wall. Ensure
that all installations conform to
local code requirements. The
mounting structure must be
designed to support a minimum
55 lb. (25 kg) static load and a
minimum moment of 203 ft.-lb.
(275 Nm).
Figure 2. Proper Installation Height and Location
Figure 3. Backboard Dimensions
60" (1524 mm)
for 12 o’clock
51" (1295 mm)
minimum
clearance to
perpendicular
wall
55" (1397 mm)
Backboard
16"
(406 mm)
18"
(457 mm)
16"
(406 mm)
6.5"
(165 mm)
18"
(457 mm)
1-3/4" diameter
(44 mm)