1. DL manuals
  2. Aastra
  3. Telephone
  4. 55I
  5. Release Note

Aastra 55I Release Note - Sip Ip Phone

Manual is about: SIP IP phones

Summary of 55I

  • Page 1

    Release note release 2.1 si sip i ip phone phone 53i, 55i, 57i, and 57i c 53i, 55i, 57i, and 57i ct rn-001029-00 rev 03.

  • Page 2

    Aastra telecom will not accept liability for any damages and/or long distance charges, which result from unauthorized and/or unlawful use. While every effort has been made to ensure accuracy, aastra telecom will not be liable for technical or editorial errors or omissions contained within this docum...

  • Page 3: Contents

    Rn-001029-00, rev 03, release 2.1 iii contents contents general information ........................................................................................................ 2 release content information ...................................................................................... 2 ...

  • Page 4: Contents

    Iv rn-001029-00, rev 03, release 2.1 contents security features .......................................................................................................... 24 transport layer security (tls) support ................................................................... 24 configuring tls ...

  • Page 5: Contents

    Rn-001029-00, rev 03, release 2.1 v contents automatic call distribution (acd) support for sylantro servers ............................... 65 configuring acd softkeys using configuration files (55i, 57i, 57i ct) ............. 67 configuring acd programmable keys using configuration files (53i, 55i)...

  • Page 6: Contents

    Vi rn-001029-00, rev 03, release 2.1 contents other interoperability features .................................................................................. 109 dns caching .......................................................................................................... 109 symmetric ud...

  • Page 7: Sip Ip Phone

    Rn-001029-00, rev 03, release 2.1 1 sip ip phone models 53i, 55i, 57i, and 57i ct release note 2.1 about this document this document provides an overview of the 2.1 features on the 5i series phones (53i, 55i, 57i, and 57i ct). For more detailed information about the features associated with each pho...

  • Page 8: General Information

    General information 2 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 general information release content information this document provides release content information on the aastra 53i, 55i, 57i, and 57i ct sip ip phone firmware. Hardware supported this release of firmware is compatib...

  • Page 9: Description

    Changes in release 2.1, build 2145 rn-001029-00, rev 03, release 2.1 3 5i series ip phone release notes changes in release 2.1, build 2145 description this section describes the new features included in release 2.1 of the 5i series ip phones. The following table specifies the 2.1 features and provid...

  • Page 10

    Changes in release 2.1, build 2145 4 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 autodial (hotline and warmline) feature page 53 centralized conferencing for sylantro servers page 60 automatic call distribution (acd) support for sylantro servers page 65 incoming/outgoing intercom wi...

  • Page 11: Hardware Support

    Hardware support rn-001029-00, rev 03, release 2.1 5 5i series ip phone release notes hardware support 53i supports 536m expansion module the 53i ip phone now supports the optional 536m expansion module (previously only supported on the 55i, 57i, and 57i ct). This module adds 36 additional softkeys ...

  • Page 12

    Hardware support 6 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 55i supports 560m expansion module the 55i ip phone now supports the optional 560m expansion module (previously only supported on the 57i and 57i ct). This module adds 60 additional softkeys to the ip phone (using the 3 ...

  • Page 13: Usability Features

    Usability features rn-001029-00, rev 03, release 2.1 7 5i series ip phone release notes usability features new options menu for ip phone release 2.1, series 5i and series 3i phones include a new “options” menu that has been redesigned to improve navigation. The new options menu applies to ip phones ...

  • Page 14

    Usability features 8 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 sip mode options menu (continued) 5. Time server 1. Time server 1 2. Time server 2 3. Time server 3 6. Set time 7. Set date 7. Language 3. Phone status 1. Ip&mac addresses 2. Lan port 3. Pc port 4. Firmware info 4. Use...

  • Page 15

    Usability features rn-001029-00, rev 03, release 2.1 9 5i series ip phone release notes sip mode options menu (continued) 2. Network settings 1. Dhcp 2. Ip address 3. Subnet mask 4. Gateway 5. Dns 1. Primary dns (53i) 2. Secondary dns (53i) 6. Nat settings 1. Nortel nat 2. Static nat 1. Nat ip 2. Na...

  • Page 16

    Usability features 10 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 sip mode options menu (continued) 3. Sip settings 53i ip phone: 1. Proxy server 2. Proxy port 3. Registrar server 4. Registrar port 5. Sip register 6. User name 7. Display name 8. Screen name 9. Authentic. Name 10. Pa...

  • Page 17

    Usability features rn-001029-00, rev 03, release 2.1 11 5i series ip phone release notes 11. Rtp port base 4. Factory default 5. Erase local config. (erase local cfg. For 53i) 6. Restart phone 7. Phone lock.

  • Page 18

    Usability features 12 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 ip phone ui-based speeddial keys ip phone users can now use the ip phone ui to change an empty softkey, or programmable key to a speeddial key. In addition, if the ip phone has an expansion module attached, you can ch...

  • Page 19

    Usability features rn-001029-00, rev 03, release 2.1 13 5i series ip phone release notes changing expansion module programmable keys to speeddial keys (53i) use the following procedure to change an empty programmable key an expansion module to a speeddial key. Changing softkeys to speeddial keys (55...

  • Page 20

    Usability features 14 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 changing expansion module softkeys to speeddial keys (55i, 57i, 57i ct) use the following procedure to change an empty softkey on an expansion module to a speeddial key 4 do one of the following actions: • accept the ...

  • Page 21

    Usability features rn-001029-00, rev 03, release 2.1 15 5i series ip phone release notes 4 do one of the following actions: • accept the default line number 1, or • to select a different line on which to apply the speeddial key, press the softkey and select a different line, or use the key pad to se...

  • Page 22

    Usability features 16 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 ability to disable call waiting currently on the ip phones, the call waiting feature notifies the user currently on the phone, of a new incoming call. Release 2.1 allows a user or administrator the ability to disable ...

  • Page 23

    Usability features rn-001029-00, rev 03, release 2.1 17 5i series ip phone release notes enabling/disabling call waiting using the configuration files use the following parameter to enable or disable call waiting on the phone using the configuration files. • call waiting parameter – call waiting cal...

  • Page 24

    Usability features 18 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 enabling/disabling call waiting using the aastra web ui use the following parameter to enable or disable call waiting on the phone using the aastra web ui. Aastra web ui 1 click on basic settings-> preferences->genera...

  • Page 25

    Usability features rn-001029-00, rev 03, release 2.1 19 5i series ip phone release notes mexico tone set added to the ip phones you can configure ring tone sets on a global-basis on the ip phones. Ring tone sets consist of tones customized for a specific country. A new ring tone set for mexico has b...

  • Page 26

    Usability features 20 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 customizable callers list and services keys the ip phones currently have a callers list key (all 5i series phones) and a services key (55i, 57i, and 57i ct). In release 2.1, two new parameters have been added that all...

  • Page 27

    Usability features rn-001029-00, rev 03, release 2.1 21 5i series ip phone release notes configuration parameters no longer case sensitive previously, the configuration parameters an administrator entered in the configuration files were case sensitive and had to be entered exactly the way they appea...

  • Page 28: Deployability Features

    Deployability features 22 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 deployability features server and protocol identification via dhcp feature the ip phones now support additional download protocols according to rfc2131 and rfc1541 to support dhcp option 66. Option 66 is part of t...

  • Page 29

    Deployability features rn-001029-00, rev 03, release 2.1 23 5i series ip phone release notes for more information about setting the download protocol on the ip phones, see the sip ip phone administrator guide. Ftp ftp://user:password@ftpserver option tftp-server-name “ftp://192.168.1.45”; option tft...

  • Page 30: Security Features

    Security features 24 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 security features transport layer security (tls) support the phones now support a new transport protocol called transport layer security (tls) and persistent tls. Tls is a protocol that ensures communication privacy be...

  • Page 31

    Security features rn-001029-00, rev 03, release 2.1 25 5i series ip phone release notes on the ip phones, an administrator can configure tls and persistent tls on a global-basis only, using the configuration files or the aastra web ui. Notes: 1. Persistent tls requires the outbound proxy server and ...

  • Page 32

    Security features 26 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 configuring tls using configuration files you use the following parameters to configure tls in the configuration files: • sip transport protocol • sips persistent tls • sips root and intermediate certificates • sips lo...

  • Page 33

    Security features rn-001029-00, rev 03, release 2.1 27 5i series ip phone release notes parameter – sips persistent tls configuration files aastra.Cfg, .Cfg description enables or disables the use of persistent transport layer security (tls). Persistent tls sets up the connection to the server once ...

  • Page 34

    Security features 28 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 parameter – sips root and intermediate certificates root and intermediate certificates (in web ui) aastra web ui advanced settings->tls support configuration files aastra.Cfg, .Cfg description allows you to specify the...

  • Page 35

    Security features rn-001029-00, rev 03, release 2.1 29 5i series ip phone release notes parameter – sips local certificate local certificate (in web ui) aastra web ui advanced settings->tls support configuration files aastra.Cfg, .Cfg description allows you to specify the local certificate file to u...

  • Page 36

    Security features 30 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 parameter – sips trusted certificates trusted certificates (in web ui) aastra web ui advanced settings->tls support configuration files aastra.Cfg, .Cfg description allows you to specify the trusted certificate files t...

  • Page 37

    Security features rn-001029-00, rev 03, release 2.1 31 5i series ip phone release notes configuring tls using the aastra web ui to configure tls using the aastra web ui, you must enable tls or persistent tls first. Then you must define the tls certificate file names that you want the phone to use. U...

  • Page 38

    Security features 32 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 4 click on advanced settings->tls support. Aastra web ui.

  • Page 39

    Security features rn-001029-00, rev 03, release 2.1 33 5i series ip phone release notes 5 enter the certificate file names and the private key file name in the appropriate fields. The root and intermediate certificate files contain one root certificate and zero or more intermediate certificates whic...

  • Page 40: Exchange

    Security features 34 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 secure real-time transfer protocol (srtp) support with sdes key exchange release 2.1 includes support for secure real-time transfer protocol (srtp), using session description protocol security (sdes) key negotiation, f...

  • Page 41

    Security features rn-001029-00, rev 03, release 2.1 35 5i series ip phone release notes configuring srtp using configuration files you use the following parameters to configure srtp in the configuration files: global parameter • sip srtp mode per-line parameter • sip linen srtp mode global parameter...

  • Page 42

    Security features 36 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 per-line parameter parameter – sip linen srtp mode aastra web ui advanced settings->line > rtp settings configuration files aastra.Cfg, .Cfg description this parameter determines if srtp is enabled on this line, as fol...

  • Page 43

    Security features rn-001029-00, rev 03, release 2.1 37 5i series ip phone release notes configuring srtp using the aastra web ui when you configure srtp using the aastra web ui, you must first globally configure srtp support for the ip phone. Then, if you wish, you can configure srtp support on a pe...

  • Page 44

    Security features 38 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 3 click to save your changes. Per-line configuration 1 note: setting a per-line srtp configuration overrides the global srtp configuration setting. Click on advanced settings->line ->rtp settings. 2 set the “rtp encryp...

  • Page 45: Xml Features

    Xml features rn-001029-00, rev 03, release 2.1 39 5i series ip phone release notes xml features new “doneaction” attribute for xml text screen object you use the aastraipphonetextscreen object to display text to the lcd screen on the ip phone. The screen text wraps appropriately and can scroll to di...

  • Page 46

    Xml features 40 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 xml description: doneaction=”http address”> the screen text goes here xml example: doneaction=”http://10.50.10.117/ test.Xml”> for more information about this test, press done. Xml screen example: note: this example display...

  • Page 47

    Xml features rn-001029-00, rev 03, release 2.1 41 5i series ip phone release notes xml support for answer and ignore softkeys in release 2.1, when the ip phone receives an xml application (either via a post or an incoming action uri) while a call is coming into the phone, the user can either answer ...

  • Page 48

    Xml features 42 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 xml example: answer softkey:answer answer softkey:ignore xml screen example: for 53i: • an line displays on the lcd when the phone receives an incoming call at the same time it receives an xml application. • xml application...

  • Page 49

    Xml features rn-001029-00, rev 03, release 2.1 43 5i series ip phone release notes implementation (53i) xml example: allowanswer = "yes"> the screen object can be implemented similar to the firmware info screen. Note that white space is preserved in xml so the display should word-wrap appropriately....

  • Page 50

    Xml features 44 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 xml softkey for special characters (55i, 57i, and 57i ct only) in release 2.1, the ip phone can dynamically receive a symbol list when it receives the aastraipphoneinputscreen xml object. You can have a single symbol specif...

  • Page 51

    Xml features rn-001029-00, rev 03, release 2.1 45 5i series ip phone release notes implementation softkeys: • 1 = xml softkey example: symbols softkey:symbollist="@#=&" xml object and softkey example: symbols softkey:symbollist="@" backspace softkey:exit dot softkey:exit email address: http://myserv...

  • Page 52: Servers

    Sylantro interoperability features 46 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 sylantro interoperability features multi-stage digit collection (billing codes) support for sylantro servers this release of the aastra ip phones supports multi-stage digit collection (billing codes) f...

  • Page 53

    Sylantro interoperability features rn-001029-00, rev 03, release 2.1 47 5i series ip phone release notes mandatory versus optional billing codes this release of the aastra ip phones supports two types of billing codes: mandatory and optional. The sylantro server configuration determines which type o...

  • Page 54

    Sylantro interoperability features 48 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 to use this format with the default dial plan terminator (#), the # sign required by sylantro as a delimiter should be represented as an escaped character by using the sequence %23. The speed dial form...

  • Page 55

    Sylantro interoperability features rn-001029-00, rev 03, release 2.1 49 5i series ip phone release notes directed call pickup/group call pickup support for sylantro servers aastra ip phones now support the sylantro directed call pickup (dcp) and group call pickup (gcp) features. The directed call pi...

  • Page 56

    Sylantro interoperability features 50 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 configuring dcp/gcp using configuration files you use the following parameter to configure dcp and gcp in the configuration files: • dcp parameter – dcp directed call pickup (in web ui) aastra web ui o...

  • Page 57

    Sylantro interoperability features rn-001029-00, rev 03, release 2.1 51 5i series ip phone release notes configuring directed call pickup (dcp) using the aastra web ui use the following procedure to configure directed call pickup using the aastra web ui. Aastra web ui 1 click on operation->softkeys ...

  • Page 58

    Sylantro interoperability features 52 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 configuring group call pickup (gcp) using the aastra web ui use the following procedure to configure group call pickup using the aastra web ui. Note: a ring group must be configured on the sylantro ser...

  • Page 59

    Sylantro interoperability features rn-001029-00, rev 03, release 2.1 53 5i series ip phone release notes autodial (hotline and warmline) feature this release of the aastra ip phones includes an “autodial” feature. When you configure autodial on an ip phone, the phone automatically dials a preconfigu...

  • Page 60

    Sylantro interoperability features 54 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 configuring autodial support using configuration files you use the following parameters to configure autodial support in the configuration files: global configuration • sip autodial number • sip autodi...

  • Page 61

    Sylantro interoperability features rn-001029-00, rev 03, release 2.1 55 5i series ip phone release notes autodial per-line configuration parameter – sip autodial timeout autodial timeout (in web ui) aastra web ui advanced settings>global sip> autodial settings configuration files aastra.Cfg, .Cfg de...

  • Page 62

    Sylantro interoperability features 56 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 parameter – sip linen autodial timeout autodial timeout (in web ui) aastra web ui advanced settings>linen>autodial settings configuration files aastra.Cfg, .Cfg description on a per-line basis, this pa...

  • Page 63

    Sylantro interoperability features rn-001029-00, rev 03, release 2.1 57 5i series ip phone release notes configuring autodial using the aastra web ui use the following procedure to configure the autodial feature on an ip phone using the aastra web ui. By default, your ip phone uses the global settin...

  • Page 64

    Sylantro interoperability features 58 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 3 in the “autodial timeout” field, specify a value for the timer as follows: • if you want the ip phone to autodial the number immediately (hotline) whenever the ip phone is off-hook, accept the defaul...

  • Page 65

    Sylantro interoperability features rn-001029-00, rev 03, release 2.1 59 5i series ip phone release notes 3 in the “autodial number” field, specify the sip number for this line that the ip phone dials whenever the ip phone is off-hook as follows: • if set to -1, then the global autodial settings for ...

  • Page 66

    Sylantro interoperability features 60 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 centralized conferencing for sylantro servers release 2.1 of the aastra ip phones includes support for centralized conferencing (ad-hoc conferencing) for sylantro and broadsoft servers. This feature pr...

  • Page 67

    Sylantro interoperability features rn-001029-00, rev 03, release 2.1 61 5i series ip phone release notes configuring centralized conferencing using the configuration files you use the following parameter to configure centralized conferencing in the configuration files: global parameter • sip central...

  • Page 68

    Sylantro interoperability features 62 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 parameter – sip linen centralized conf conference server uri (in web ui) aastra web ui advanced->line -> basic sip network settings configuration files aastra.Cfg, .Cfg description enable or disable pe...

  • Page 69

    Sylantro interoperability features rn-001029-00, rev 03, release 2.1 63 5i series ip phone release notes configuring centralized conferencing using the aastra web ui use the following procedure to configure centralized conferencing on an ip phone. Aastra web ui global configuration 1 click on advanc...

  • Page 70

    Sylantro interoperability features 64 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 3 click to save your changes. Per-line configuration 1 click on advanced settings->line ->basic sip network settings 2 in the “conference server uri” field, do one of the following actions: • to disabl...

  • Page 71

    Sylantro interoperability features rn-001029-00, rev 03, release 2.1 65 5i series ip phone release notes automatic call distribution (acd) support for sylantro servers release 2.1 of the ip phones includes automatic call distribution (acd) support for sylantro servers. The acd feature allows the syl...

  • Page 72

    Sylantro interoperability features 66 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 acd led table the led located next to the acd softkey flashes or remains solid to indicate the current status of the ip phone. In addition, an icon on the ip phone ui reminds ip phone users of their cu...

  • Page 73

    Sylantro interoperability features rn-001029-00, rev 03, release 2.1 67 5i series ip phone release notes configuring acd softkeys using configuration files (55i, 57i, 57i ct) you use the following parameters to configure acd support in the configuration files for 55i, 57i, 57i ct: • softkeyn type • ...

  • Page 74

    Sylantro interoperability features 68 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 parameters – softkeyn type auto call distribution (in web ui) aastra web ui operation->softkeys and xml configuration files aastra.Cfg, .Cfg description defines the type of softkey that is configured f...

  • Page 75

    Sylantro interoperability features rn-001029-00, rev 03, release 2.1 69 5i series ip phone release notes parameters – softkeyn line auto call distribution (in web ui) aastra web ui operation->softkeys and xml configuration files aastra.Cfg, .Cfg description this is the line associated with the softk...

  • Page 76

    Sylantro interoperability features 70 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 parameters – topsoftkeyn type auto call distribution (in web ui) aastra web ui operation->softkeys and xml configuration files aastra.Cfg, .Cfg description defines the type of top softkey that is confi...

  • Page 77

    Sylantro interoperability features rn-001029-00, rev 03, release 2.1 71 5i series ip phone release notes parameters – topsoftkeyn line auto call distribution (in web ui) aastra web ui operation->softkeys and xml configuration files aastra.Cfg, .Cfg description this is the line associated with the to...

  • Page 78

    Sylantro interoperability features 72 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 configuring acd programmable keys using configuration files (53i, 55i) you use the following parameter to configure acd support in the configuration files: • prgkeyn type • prgkeyn line parameter – prg...

  • Page 79

    Sylantro interoperability features rn-001029-00, rev 03, release 2.1 73 5i series ip phone release notes configuring acd expansion keys using configuration files (53i, 55i, 57i, and 57i ct) you use the following parameter to configure acd support in the configuration files: • expmodx keyn type • exp...

  • Page 80

    Sylantro interoperability features 74 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 configuring acd softkeys/programmable keys/expansion module keys using the aastra web ui use the following procedure to configure an acd softkey, programmable key, or expansion module key using the aas...

  • Page 81

    Sylantro interoperability features rn-001029-00, rev 03, release 2.1 75 5i series ip phone release notes 3 in the “label” field, specify a name for this acd softkey. The label helps identify which queue you are subscribing to when you login. (this field does not apply to the 53i.) for example: suppo...

  • Page 82

    Sylantro interoperability features 76 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 configuring acd auto-available timer using configuration files you use the following parameters to configure an acd auto-configuration timer in the configuration files: • acd auto available • acd auto ...

  • Page 83

    Sylantro interoperability features rn-001029-00, rev 03, release 2.1 77 5i series ip phone release notes configuring acd auto-available timer using the web ui use the following procedure to configure an acd auto-available timer using the aastra web ui. Aastra web ui 1 click on basic settings->prefer...

  • Page 84

    Sylantro interoperability features 78 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 using the acd feature on your ip phone the acd feature allows you to login to a phone queue in order to receive distributed calls on your ip phone. To login to a phone queue, your system administrator ...

  • Page 85

    Sylantro interoperability features rn-001029-00, rev 03, release 2.1 79 5i series ip phone release notes this icon changes when you log on to the phone queue and are available to take calls. The icon changes again when you are busy with an active call. The table below describes the meaning of the le...

  • Page 86

    Sylantro interoperability features 80 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 logging in to a phone queue (55i, 57i, 57i ct) use the following procedure to log into a phone queue from your aastra ip phone. Aastra ip phone ui step action 1 press the acd softkey on your ip phone. ...

  • Page 87

    Sylantro interoperability features rn-001029-00, rev 03, release 2.1 81 5i series ip phone release notes 3 press the log in softkey. You are logged into the phone queue. Once you log in, examine the ip phone ui, and note the following information: • if your ip phone status is set to “available” then...

  • Page 88

    Sylantro interoperability features 82 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 logging in to a phone queue (53i) use the following procedure to log into a phone queue from your aastra ip phone. Aastra ip phone ui step action 1 press the acd programmable key on your ip phone. 2 to...

  • Page 89: Phone

    Sylantro interoperability features rn-001029-00, rev 03, release 2.1 83 5i series ip phone release notes incoming/outgoing intercom with auto-answer and barge-in for 53i ip phone in release 2.1, the 53i ip phone now supports incoming/outgoing intercom calls with auto-answer and barge-in features. Th...

  • Page 90

    Sylantro interoperability features 84 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 incoming intercom calls you can configure how the phone handles incoming intercom calls. You can receive incoming intercom calls whether or not there are active calls on the phone. The way the phone ha...

  • Page 91

    Sylantro interoperability features rn-001029-00, rev 03, release 2.1 85 5i series ip phone release notes for incoming intercom calls, an administrator or user can configure the following parameters: configuring intercom, auto-answer, and barge-in via the configuration files use the following paramet...

  • Page 92

    Sylantro interoperability features 86 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 outgoing intercom settings parameter – sip intercom type type (in web ui) aastra web ui basic settings->preferences-> outgoing intercom settings configuration files aastra.Cfg, .Cfg description determi...

  • Page 93

    Sylantro interoperability features rn-001029-00, rev 03, release 2.1 87 5i series ip phone release notes incoming intercom settings parameter – sip allow auto answer auto-answer (in web ui) aastra web ui basic settings->preferences-> incoming intercom settings configuration files aastra.Cfg, .Cfg de...

  • Page 94

    Sylantro interoperability features 88 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 parameter – sip play warning tone play warning tone (in web ui) aastra web ui basic settings->preferences-> incoming intercom settings configuration files aastra.Cfg, .Cfg description enables or disabl...

  • Page 95

    Sylantro interoperability features rn-001029-00, rev 03, release 2.1 89 5i series ip phone release notes configuring intercom, auto-answer, and barge-in via the aastra web ui use the following procedure to configure intercom, auto-answer, and barge-in using the aastra web ui. Aastra web ui 1 click o...

  • Page 96

    Sylantro interoperability features 90 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 outgoing intercom settings: 1 click on basic settings->preferences->outgoing intercom settings. 2 select an intercom type for outgoing intercom calls from the type list box. Valid values are phone-side...

  • Page 97

    Sylantro interoperability features rn-001029-00, rev 03, release 2.1 91 5i series ip phone release notes incoming intercom settings: 1 click on basic settings->preferences->incoming intercom settings. 2 the "auto-answer" field is enabled by default. The automatic answering feature is turned on for t...

  • Page 98

    Sylantro interoperability features 92 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 missed call summary subscription a new feature in release 2.1 on the ip phones allows missed calls that have been redirected by the server, to be incremented in the missed calls indicator on the phone ...

  • Page 99

    Sylantro interoperability features rn-001029-00, rev 03, release 2.1 93 5i series ip phone release notes configuring missed call summary subscription using the configuration files you can configure the missed call summary subscription feature on a global or per-line basis. You can also configure the...

  • Page 100

    Sylantro interoperability features 94 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 global parameters parameter – sip missed call summary subscription missed call summary subscription (in web ui) aastra web ui advanced settings->global sip-> advanced sip settings configuration files a...

  • Page 101

    Sylantro interoperability features rn-001029-00, rev 03, release 2.1 95 5i series ip phone release notes per-line parameter parameter – sip missed call summary subscription period missed call summary subscription period (in web ui) aastra web ui advanced settings->global sip-> advanced sip settings ...

  • Page 102

    Sylantro interoperability features 96 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 configuring missed call summary subscription using the aastra web ui use the following procedure to configure the missed call summary subscription feature using the aastra web ui. Aastra web ui global ...

  • Page 103

    Sylantro interoperability features rn-001029-00, rev 03, release 2.1 97 5i series ip phone release notes per-line configuration 1 click on advanced settings->line ->advanced sip settings. 2 the "missed call summary subscription" field is disabled by default. To enable this field, check the box. This...

  • Page 104

    Sylantro interoperability features 98 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 message waiting indicator on single or all lines release 2.1 now allows a user or administrator to configure the message waiting indicator (mwi) to illuminate for a specific line or for all lines. For ...

  • Page 105

    Sylantro interoperability features rn-001029-00, rev 03, release 2.1 99 5i series ip phone release notes configuring mwi using the aastra web ui use the following procedure to configure the mwi for a single line or for all lines on the phone using the aastra web ui. Aastra web ui 1 click on basic se...

  • Page 106

    Sylantro interoperability features 100 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 support for “delay” before auto-answer aastra ip phones now include support for the "delay" parameter (in the alert-info header, used in conjunction with info=alert-autoanswer) in order to facilitate ...

  • Page 107

    Sylantro interoperability features rn-001029-00, rev 03, release 2.1 101 5i series ip phone release notes sip asserted identity for sylantro servers this release includes support for a private extension to the sip, asserted identity within trusted networks (as defined in rfc 3325), inside the user a...

  • Page 108

    Sylantro interoperability features 102 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 “whitelist” proxy support for sylantro servers to protect your ip phone network, you can configure a “whitelist” proxy feature that screens incoming call requests received by aastra ip phones. When th...

  • Page 109

    Sylantro interoperability features rn-001029-00, rev 03, release 2.1 103 5i series ip phone release notes configuring whitelist proxy support using the aastra web ui use the following procedure to configure the whitelist proxy feature using the aastra web ui. Aastra web ui 1 click on advanced settin...

  • Page 110

    Sylantro interoperability features 104 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 bla support for third party registration bla allows an address of record (aor) to be assigned onto different line appearances for a group of sip user agents (ip phones). When a call is made to this bl...

  • Page 111

    Sylantro interoperability features rn-001029-00, rev 03, release 2.1 105 5i series ip phone release notes #alice phone number sip line2 bla number:4085582868 sip line2 display name:alice sip line2 screen name:alice alice’s configuration is as follows: #line 1 sip line1 auth name:4085582868 sip line1...

  • Page 112

    Broadsoft interoperability features 106 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 broadsoft interoperability features “hold” feature enhancement for broadsoft servers in this release of the aastra ip phones, the “hold” feature has been enhanced as described in rfc3264. The hold fe...

  • Page 113

    Broadsoft interoperability features rn-001029-00, rev 03, release 2.1 107 5i series ip phone release notes configuring a sip server blacklist using the configuration files you use the following parameter to configure a sip server blacklist in the configuration files: • sip blacklist duration paramet...

  • Page 114

    Broadsoft interoperability features 108 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 configuring a server blacklist using the aastra web ui you use the following procedure to configure a server blacklist using the aastra web ui. Aastra web ui 1 click on advanced settings->global sip-...

  • Page 115: Dns Caching

    Other interoperability features rn-001029-00, rev 03, release 2.1 109 5i series ip phone release notes other interoperability features dns caching the ip phones have the ability to cache dns requests according to rfc1035 and rfc2181. The phone caches dns lookups according to the ttl field, so that t...

  • Page 116

    Other interoperability features 110 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 configuring symmetric udp signaling using configuration files you use the following parameter to configure symmetric udp signaling in the configuration files: sip symmetric udp signaling parameter – sip ...

  • Page 117

    Other interoperability features rn-001029-00, rev 03, release 2.1 111 5i series ip phone release notes ability to remove useragent and server sip headers currently, the phone always configures the sip useragent/server headers to contain: aastra / a new feature has been added to release 2.1 that allo...

  • Page 118: Release 2.1, Build 2145

    Issues resolved on series 5i phones in release 2.1, build 2145 112 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 issues resolved on series 5i phones in release 2.1, build 2145 this section describes the issues resolved on the series 5i ip phones in release 2.1. The following table pro...

  • Page 119

    Issues resolved on series 5i phones in release 2.1, build 2145 rn-001029-00, rev 03, release 2.1 113 5i series ip phone release notes xml def05187 def05188 def05192 def05237 def05239 speeddial now works correctly when an offhook action uri is configured. Def05192 with offhook action uri configured, ...

  • Page 120

    Issues resolved on series 5i phones in release 2.1, build 2145 114 rn-001029-00, rev 03, release 2.1 ip phone release notes 2.1 cln06182 mute key now works when the phone is locked. This enables the user to "answer" and intercom call, which automatically mutes the voice path. Def06632 57ict: no long...

  • Page 121

    Contacting aastra telecom support rn-001029-00, rev 03, release 2.1 115 5i series ip phone release notes contacting aastra telecom support if you’ve read this release note, and consulted the troubleshooting section of your phone model’s manual and still have problems, please send inquiries via email...

  • Page 124: Generic Sip Ip Phone

    Generic sip ip phone model 5i series 2.1 release notes copyright © 2007 aastra telecom. All rights reserved. Information in this document is subject to change without notice. Aastra telecom assumes no responsibility for any errors that may appear in this document. Product capabilities described in t...