Aastra Clearspan 6739i User Manual - Speed Dialling
Using the Aastra 6739i
13
Note
Establishing a call can be delayed with SIP telephony. When using a headset, e.g.
you should wait a second before you begin to speak.
Speed Dialling
The administrator of the Aastra 800 / OpenCom 100 communications system can
configure function keys with speed dialling destinations (please refer to Pro-
gramming Function Keys starting on page 19).
■
Pick up the handset and press the function key where the speed dialling
destination is programmed.
alternatively – when you wish to call in the handsfree mode:
■
Press the function key – with the handset down – where the speed dialling
destination is programmed.
Caller Lists
The administrator of the Aastra 800 / OpenCom 100 communications system can
configure Missed calls and Accepted calls function keys (please refer to Pro-
gramming Function Keys starting on page 19). Use these function keys to access
the caller lists managed on the Aastra 800 / OpenCom 100 communications
system. The Missed calls softkey blinks when the list contains new entries.
1. Press the Missed calls or Accepted calls function key to show the respective
call list. Press the
caller key to display the list of missed calls.
The caller list appears.
2. Use the navigation keys
to go to the desired entry.
3. To call the caller back, pick up the handset or press the
softkey.
If you would like to conduct the following call in the handsfree mode, press the
handsfree key
and then the
Dial softkey.
The call number is called. The display shows a picture (photo) of the user called
if an image has been saved on the Aastra 800 / OpenCom 100 communications
system (please refer to page 24).
4. To show detailed information on the entry selected, press the
softkey. The
call number of the caller, number of calls from this call number and date of the
last call is displayed. You can now call the caller back as described in the
previous step.