Aastra Clearspan 6739i User Manual - Call Forwarding
Using the Aastra 6739i
16
Call Forwarding
The administrator of the Aastra 800 / OpenCom 100 communications system can
configure a “Call forwarding” function key (Call forw.) (please refer to Pro-
gramming Function Keys starting on page 19).
1. Press the “Call forwarding” function key (Call forw.).
The display shows a separate line with immediately, after Time or busy for
each type of call forwarding along with the status (on/off ). A separate call
forwarding can be configured for each type of call forwarding.
2. Press the
softkey on the display line showing the desired call forwarding
type.
3. Program the following call forwarding parameters by pressing the respective
softkey next to it:
– switch on / switch off: Switches call forwarding on or off.
– Phone No.: Activate the Phone No. field by pressing on it. A softkey
keyboard appears on the display.
Enter the destination call number to be forwarded to via the number keys.
To correct a mistaken entry use the Bksp (backspace) softkey.
Press the Hide softkey to hide the keyboard.
Confirm using the Enter softkey.
– Call type: Select the calls to be forwarded: intern (internal calls), extern
(external calls) or int.+ext. (internal and external calls). To do so, press the
softkey next to it.
4. Press the goodbye key
to exit the menu card.
Voicebox
The administrator of the Aastra 800 / OpenCom 100 communications system can
configure a voicebox for you as an answering machine. This voicebox is operated
via a “Voice message” function key (Voice msg.) (please refer to Programming
Function Keys starting on page 19). Activating or deactivating the voicebox is
done via call forwarding to a voicebox call number (please refer to Call Forwarding
starting on page 16).
Any time there are new messages on your OpenVoice voicebox, the Aastra 6739i
display shows the symbol
(upper left) and below it the number of voicebox
messages received. The Voice msg. softkey as well as the
voice mail key blink
red.