TECHNICAL
-
Time Code Off/On
allows you to choose to insert (On) or nor
(Off ) AatonCode information, which consists of Time, Date and
Equipment number ID.
-
Font
allows you to choose the font you need for the characters to
be inserted. Choose 1 for standard characters and 2 for bold charac-
ters.
-
Automatic Power Off
allows you to choose between an automatic
shut off ( On ) or a manual one (Off ).
-
Delay to power off
allows you ( displayed only if the Automatic Po-
wer Off mode has been chose ) to choose an automatic shut off of the
video assist, from 10 to 60 minutes. Use arrows to proceed.
-
Vitc Position
allows you to choose the position of the Vitc lines.
Choose between line 10 and 19 in PAL (Aaton recommends line 19),
between 13 and 19 in NTSC.
-
Parity
allows you to select the parity of the Vitc lines between Odd
and Even.
Make sure that your Post-production tools run properly with the se-
lected value.
-
Low camera Speed
allows you to incease brightness and sharpness
in low camera speed mode ( from 3 to 12 fps).
-
Burn-in White level
allows you to modify the intensity of the whi-
te burn-in frame. You can choose from
-100
( almost grey ) to
+50
.
The medium position is
000.
Use arrows to proceed.
54