AAton XTR User Manual - 4.1 Camera Configurations
4.1 CAMERA CONFIGURATIONS
4.1.1 15mm Front Rods
The most versatile and popular configuration for accessorizing the
XTRplus camera, the universal 15mm screw-in front rod system can
instantly accept Aaton, Arri, Chrosziel, Petroff and other manufactu-
rers' mattebox and follow focus systems. Utilizing the front rod sys-
tem allows for quick conversion from tripod to shoulder operating
modes without the need for recon-figuration.
Aaton manufactures 60mm and 120mm length rods that screw di-
rectly into the front housing of XTRprod underneath the lens port.
The 15mm front rod system is recommended when standard size
lenses and accessories are to be used or when quick conversion bet-
ween tripod and handheld modes is necessary.
4.1.2 Sliding Bridgeplate
The XTRprod can also accept standard 15 and 19mm sliding brid-
geplates for building the camera system for high-end studio work.
The bridgeplate configuration can accept Aaton, Arri, Chrosziel and
other manufacturers' mattebox, follow focus and support equipment
that is designed for bridgeplate use.
Standard bridgeplates from
Aaton, Arri and other manu-
facturers can be attached to
the XTRprod by means of
the 3/8-16 tripod recepticle
on the underside of the came-
ra.
The sliding bridgeplate sys-
tem is recommended when
large 35mm lenses and acces-
sories are to be used, when
using a geared head or when
the highest possible produc-
tion value is neccessary.
73
THE AATON SYSTEM