Abatron BDI2000 User Manual - page 4
bdiPro
for BDI2000 (CPU16/32/32+)
User Manual
4
© Copyright 1993-2001 by ABATRON AG
V 1.12
1.2 Functions
The bdiPro software provides the following functions:
File
Load/Save
• Save and recall user defined program sets
• Print the active program set
Print Preview
• Display the active program set on the screen
Print Setup
• Select the printer and the printer connection
Print Comment
• Edit the headers and comment
Edit
Load
• Load Motorola S-Record and Intel hex program files
Store
• Store the local memory image in S-Record format
Dump
• Load the target system data into local memory
Edit
• Edit the local memory image
Clear
• Clear the local memory image
Fill
• Fill a local memory area with pattern
Checksum
• Calculation of checksum
Target
Erase
• Erase the target memory (all / sectors)
Program
• Program the target memory
Verify
• Compare the target system memory with local memory
Setup
Communication
• Communication setup between the PC and the BDI
Firmware
• Load and verify the firmware
Target Memory
• Target memory setup (memory type and memory organisation)
Target Initlists
• User configurable program sequences for target system initialization
(clock, chip select...)
• If required, you can write special routines that runs before or after
the program/erase process (pre-programming, post-programming /
pre-erase, post-erase).
Help
• Information about menus and dialog boxes by pressing the F1
function key