1. DL manuals
  2. ABB
  3. Server
  4. COM600 series
  5. Configuration Manual

ABB COM600 series Configuration Manual

Manual is about: Distribution automation controller

Summary of COM600 series

  • Page 1

    Com600 series, version 4.1 fdir configuration manual.

  • Page 3

    Contents: 1. About this manual .................................................................................. 5 1.1. Copyright ........................................................................................ 5 1.2. Disclaimer .................................................................

  • Page 4

    4.

  • Page 5: About This Manual

    About this manual 1. Copyright 1.1. This document and parts thereof must not be reproduced or copied without written per- mission from abb, and the contents thereof must not be imparted to a third party, nor used for any unauthorized purpose. The software or hardware described in this document is fu...

  • Page 6

    Be responsible or liable for any loss or damage resulting from the use of this manual or the application of the equipment. Conformity 1.3. This product complies with the directive of the council of the european communities on the approximation of the laws of the member states relating to electromagn...

  • Page 7

    • the following convention is used for menu operations: menuname > menu- item > cascadedmenuitem. For example: select file > new > type. • the start menu name always refers to the start menu on the windows taskbar. • system prompts/messages and user responses/input are shown in the courier font. For...

  • Page 8

    Terminology 1.8. The following is a list of terms associated with com600 that you should be familiar with. The list contains terms that are unique to abb or have a usage or definition that is different from standard industry usage. Description term a physical device that behaves as its own communica...

  • Page 9

    History product revision document version/date document revised 4.0 b/31.5.2012 c/13.3.2015 9 com600 series, version 4.1 1mrs757278 fdir configuration manual.

  • Page 10: Introduction

    Introduction 2. General about the com600 series 2.1. The com600 series comprises of substation management units that are deployed together with protection and control relays and other communication devices, such as relion® protection and control relays and remote i/o units, to realize smart substati...

  • Page 11: Fdir Configuration

    Fdir configuration 3. Building fdir project on sab600 3.1. To build an fdir project on sab600, you need to configure a proper communication structure, single line diagram and use fdir configuration tool to automatically generate a logic processor fdir project and cross-references. When fdir is used ...

  • Page 12

    Ied_configuration figure 3.2-1 ied configuration to implement fdir, certain settings must be configured properly to enable the automation restoration logic. Table 3.2-1 data objects required for fdir mandatory/optional description data object mandatory this data object is used to determine if the sw...

  • Page 13

    Mandatory/optional description data object optional used to change setting group on the ied. In the fdir configuration tool, user can set the load level for different setting groups. During fdir opera- tion, system will check the new load and change the setting group on the ied. Lln0/act1sg lln0/act...

  • Page 14

    Fdir_sld figure 3.3-1 fdir single line diagram the measurements readings from ieds are optional. Figure 3.3-2 shows a preview of the fdir single line diagram. 14 1mrs757278 com600 series, version 4.1 fdir configuration manual.

  • Page 15

    Fdir_sld_preview figure 3.3-2 preview of fdir single line diagram fdir configuration tool 3.4. Launching fdir configuration tool 3.4.1. To launch fdir configuration tool: 1. In the substation structure, right-click the voltage level node in the substation structure. 2. Select fdir tool, see figure 3...

  • Page 16

    Launch_fdir_configuration_tool figure 3.4.1-1 launch fdir configuration tool the fdir tool opens. Fdir configuration tool functions 3.4.2. Fdir configuration tool can be used for the following functions: • enabling device in the network and specifying capacity limit • specifying group setting • gene...

  • Page 17

    Fdir_network_setup figure 3.4.3-1 fdir configuration tool - network setup on the switch tab, you can enable or disable the switch to be included in the fdir net- work. You can also change the capacity limit on the switch. Fdir also supports single phase switch in the network. When single phase is se...

  • Page 18

    Fdir_setting_groups figure 3.4.4-1 protection setting group changing cross references 3.4.5. In the data connection tab, you can view and manually change the cross reference of fdir variables. The variable column contains a list of variables used in the fdir logic. The opc item contains the mappings...

  • Page 19

    Fdir_data_connection figure 3.4.5-1 data connection 19 com600 series, version 4.1 1mrs757278 fdir configuration manual.

  • Page 20

    Select_cross_reference figure 3.4.5-2 select cross reference generating fdir logic processor configuration 3.4.6. Another result of fdir configuration tool is the logic processor cross reference. In the communication structure, right-click logic processor and select cross references. Cross reference...

  • Page 21

    Logic_processor_cross_reference figure 3.4.6-1 cross reference options 3.4.7. The options tab shows the options you can select when running the fdir tool. If you add your own cross references, clear the update cross references check box to prevent the changes from being overwritten when you run the ...

  • Page 22

    Options.Png figure 3.4.7-1 options downloading fdir configuration 3.5. Downloading fdir configuration 3.5.1. The following steps are required for downloading fdir configuration to com600: • 3.5.2, downloading fdir logic processor project • 3.5.3, downloading fdir sab600 configuration downloading fdi...

  • Page 23

    Launch_logic_editor figure 3.5.2-1 launch logic editor the fdir project opens in a separate logic processor editor window. 3. In logic processor editor, select device to open the device dialog. 4. In the device dialog, select the default device. For more information, see logic processor user manual....

  • Page 24

    24.

  • Page 26

    Contact us 1mrs757278 c/13.3.2015 © copyright 2015 abb. All rights reserved. Abb oy distribution automation p.O. Box 699 fi-65101 vaasa, finland tel. +358 10 22 11 fax. +358 10 224 1094 abb inc. Distribution automation 655 century point lake mary, fl 32746, usa tel: +1 407 732 2000 fax: +1 407 732 2...