- DL manuals
- ABB
- Server
- COM600 series
- User Manual
ABB COM600 series User Manual
Summary of COM600 series
Page 1
— com600 series, version 5.0 iec 60870-5-103 master (opc) user's manual.
Page 3
Contents: 1. About this manual .................................................................................. 7 1.1. Copyright ........................................................................................ 7 1.2. Disclaimer .................................................................
Page 4
3.4.5.7. Directional protection activation information (acd) .......................................................... 29 3.4.5.8. Device name plate (dpl) ........................... 30 3.4.5.9. Logical node name plate (lpl) .................. 30 3.4.6. Data objects for measurand information .........
Page 5
5.2.4.2. Controllable double point (dpc) ................. 49 5.2.4.3. Binary controlled step position information (bsc) .......................................................... 49 5.3. Attributes ...................................................................................... 50 5.3.1. Gene...
Page 6
6.
Page 7: About This Manual
About this manual 1. Copyright 1.1. This document and parts thereof must not be reproduced or copied without written per- mission from abb, and the contents thereof must not be imparted to a third party, nor used for any unauthorized purpose. The software or hardware described in this document is fu...
Page 8: Conformity
Be responsible or liable for any loss or damage resulting from the use of this manual or the application of the equipment. Conformity 1.3. This product complies with the directive of the council of the european communities on the approximation of the laws of the member states relating to electromagn...
Page 9: Document Conventions
Operation this section covers the basic operation procedures you can carry out when transferring or activating grid automation controller com600 (later referred to as com600) with new configurations. You are also given instructions on how to monitor and control the iec103 commu- nication. Technical ...
Page 10: Use Of Symbols
Use of symbols 1.7. This publication includes warning, caution, and information icons that point out safety- related conditions or other important information. It also includes tip icons to point out useful information to the reader. The corresponding icons should be interpreted as follows. The elec...
Page 11: Abbreviations
Description term the data set is the content basis for reporting and logging. The data set contains references to the data and data attribute val- ues. Data set a physical device that behaves as its own communication node in the network, for example, protection relay. Device change of process data o...
Page 12: Related Documents
Description abbreviation network control center ncc object linking and embedding ole ole for process control opc protection & control p&c programmable logic controller plc program organization unit pou request to send rts substation automation sa substation configuration description scd substation c...
Page 13: Introduction
Introduction 2. General information about the com600 series 2.1. The com600 product series are versatile substation management units that help realize smart substation and grid automation solutions in industrial and utility distribution net- works. They get deployed together with protection and cont...
Page 14: Functional Overview
• com600f is a dedicated distribution automation controller unit that runs dis- tributed grid and feeder applications for ansi power networks and inherits all core features of the com600 series. Functional overview 2.3. The iec103 opc server provides methods for opc clients to exchange data with dev...
Page 15: 2.4.
To create a common and protocol independent data interface between the opc server and client, the process data from the iec103 devices is remodeled using the iec 61850 data modeling. The configuration data is stored in the scl format. After the iec103 opc server has been launched, it reads the confi...
Page 16: Configuration
Configuration 3. About this section 3.1. This section guides you in the configuration tasks required before you can start using the iec103 opc server. For information on the iec 61850 data modeling, refer to com600 user's manual. Start sab600 to open and name a project. 1. Select file > open/manage ...
Page 17
Sab600_iec103_example_view.Png figure 3.2-1 example view of sab600 the configuration work can basically be divided into two separate tasks: 1. Building an object tree, and 2. Configuring object properties. First, you need to build an object tree. This is done by adding objects to the object tree, se...
Page 18: Building Object Tree
Description object an object representing a physical communication channel. You can define up to three channels per opc server. Iec103 channel an object representing a physical device. You should not have more than 30 devices per each channel. Iec103 ied an object representing a group of functions. ...
Page 19
Adding gateway object 3.3.2. To start building the object tree, add a gateway object in the communication structure by selecting the project name, right-click it and select new > communication > gate- way. Adding iec103 opc server object 3.3.3. After the gateway object has successfully been added, y...
Page 20: Configuring Objects
Adding logical device objects 3.3.6. To add a logical device object: 1. Select an iec103 device object and right-click it. 2. Add a logical device object. 3. Rename the new object. The names of the logical device objects have to be unique. Each iec103 physical device must have at least one logical d...
Page 21
Sab600_iec103_object_properties.Png figure 3.4.1-1 example of object properties in the objects properties window 2. Select the property you want to configure. Depending on the property value type, configuring is always done either by • selecting a predefined value from a drop-down menu, or • enterin...
Page 22
Configuring iec103 channel properties 3.4.3. The iec103 channel properties that can be configured and value ranges for them can be found in table 3.4.3-1. The actual configuration by using sab600 is performed as described in 3.4.1, general information about configuring objects. Table 3.4.3-1 iec103 ...
Page 23
Description value or value range/ default name delay of the receiving activation in milli- seconds 0...255 default: 0 receiver interrupt delay maximum waiting time of a link layer response in seconds 0...65535 default: 2 response timeout rts keep up padding characters 0...255 default: 0 rts keep up ...
Page 24
Configuring iec103 device properties 3.4.4. Table 3.4.4-1 lists the value ranges and/or default values for the iec103 device properties that you can define. The actual configuration by using sab600 is performed as described in 3.4.1, general information about configuring objects. Table 3.4.4-1 iec10...
Page 25
Description value or value range/ default name time synchronization interval in seconds 0...65535 default: 15 time synchroniza- tion interval control authoriza- tion opc path of the station remote switch position is used with this device. The format is node#progid for opc server#channel name\ied nam...
Page 26
Single point status (sps) 3.4.5.2. Table 3.4.5.2-1 configurable sps properties for opc servers description value or value range/ default property/para- meter basic common data class according to iec 61850 sps common data class addresses iec103 indication function type 0...255 default: 101 indication...
Page 27
Integer status (ins) 3.4.5.4. Table 3.4.5.4-1 configurable dps properties for opc servers description value or value range / default property/ para- meter basic common data class according to iec 61850 ins common data class addresses iec103 indication function type 0...255 default: 101 indication fu...
Page 28
Protection activation information (act) 3.4.5.6. Table 3.4.5.6-1 configurable act properties for opc servers description value or value range/ default property/para- meter basic common data class according to iec 61850 act common data class general addresses iec103 function type for general 0...255 ...
Page 29
Directional protection activation information (acd) 3.4.5.7. Table 3.4.5.7-1 configurable acd properties for opc servers description value or value range/ default property/para- meter basic common data class according to iec 61850 acd common data class general addresses iec103 function type for gene...
Page 30
Device name plate (dpl) 3.4.5.8. Table 3.4.5.8-1 configurable dpl properties for opc servers description value or value range/ default property/ para- meter basic common data class according to iec 61850 dpl common data class addresses iec103 indication function type 0...255 default: 101 indication ...
Page 31
Description value or value range/ default property/ para- meter iec103 indication information number 0...255 default: 105 indication informa- tion number vendor a simple textstring, describing the vendor. Default: abb vendor software revision a simple textstring, describing the software revision. De...
Page 32
Description value or value range / default property/ para- meter iec103 indication function type 0...255 default: 101 indication function type iec103 indication index 1...255 default: 1 indication index iec103 indication information number 0...255 default: 105 indication informa- tion number scale a...
Page 33
Description value or value range/ default property/para- meter common data class according to iec 61850 wye common data class phase a addresses iec103 function type for phase a 0...255 default: 160 phase a function type iec103 index for phase a 1...255 default: 1 phase a index iec103 information num...
Page 34
Description value or value range/ default property/para- meter scale and unit scale to be used with neutral for this data object default: none neutral scale scale to be used with phases for this data object default: none phase scale delta (del) 3.4.6.5. Table 3.4.6.5-1 configurable del properties fo...
Page 35
Description value or value range/ default property/ para- meter iec103 index for phase ca 1...255 default: 3 phase ca index iec103 information number for phase ca 0...255 default: 144 phase ca informa- tion number scale and unit scale to be used with phases with this data object default: none phase ...
Page 36
Description value or value range/ default property/ para- meter iec103 command asdu type 0...255 default: 20 command asdu type iec103 command function type 0...255 default: 101 command function type iec103 command information number 0...255 default: 105 command informa- tion number subtype of the cu...
Page 37
Description value or value range/ default property/ para- meter subtype of the current data object: same com- mand and indica- tion addresses addresses iec103 command asdu type 0...255 default: 20 command asdu type iec103 command function type 0...255 default: 101 command function type iec103 comman...
Page 38
Description value or value range/ default property/ para- meter common data class according to iec 61850 bsc common data class subtype of the current data object: same com- mand and indica- tion addresses addresses iec103 command asdu type 0...255 default: 20 command asdu type iec103 command functio...
Page 39
Description value or value range/ default property/ para- meter scale to be used with this data object default: none scale 39 com600 series, version 5.0 1mrs752278 iec 60870-5-103 master (opc) user's manual.
Page 40: Operation
Operation 4. About this section 4.1. This section describes the basic operation procedures you can carry out after the iec103 opc server has been configured. After this, you can, for example, monitor and control the condition of connections in an iec103 network. This is done by using the online diag...
Page 41
Eventlog_103.Jpg figure 4.3-2 event log file diagnostic ae client diagnostic events can be monitored and controlled using the diagnostic ae client function, see figure 4.3-3 . Click refresh to update the status information. To be able to receive events from a certain device, diagnostic events must b...
Page 42: 4.4.
Monitoring and controlling iec103 channel activity 4.4. The iec103 channel activity can be monitored with the online diagnostics function. You can also take a channel into use or out of use as described in this section. To monitor and control iec103 channel activity: 1. Select the channel you want t...
Page 43: Data Object Diagnostics
Iec103_device_online_diagnostics.Jpg figure 4.5-1 iec103 device online diagnostics data object diagnostics 4.6. For information on data object diagnostics, refer to com600 user’s manual. 43 com600 series, version 5.0 1mrs752278 iec 60870-5-103 master (opc) user's manual.
Page 44: Technical Reference
Technical reference 5. About this section 5.1. This section provides reference information about the following issues: • iec 61850 data modeling • attributes • status codes iec 61850 data modeling 5.2. General information about iec 61850 data modeling 5.2.1. The relationship between the iec 61850 da...
Page 45
Opc data types protocol informa- tion element mandatory /optional value/ value range type name vt_bstr o text description d double point status (dps) 5.2.2.2. Dps represents asdus 1 and 2. Table 5.2.2.2-1 double point status (dps) information opc data types protocol informa- tion element mandatory/ ...
Page 46
Table 5.2.2.4-1 enumerated status (ens) information opc data types protocol information element mandatory/ optional value/ value range type name vt_i4 mval, scl m enumer- ated stval vt_i4 er, ov, time validity m quality q vt_date cp32 m timestamp t vt_bstr o text description d protection activation ...
Page 47
Table 5.2.2.7-1 device name plate (dpl) information opc data types protocol informa- tion element mandat- ory/optional value/ value range type name vt_bstr asc chars [1...8] m visiblestring vendor vt_bstr o visiblestring hwrev vt_bstr asc chars [9...12] o visiblestring swrev vt_bstr o visiblestring ...
Page 48
Complex measured value (cmv) 5.2.3.2. Cmv represents asdus 3, 4 and 9. Opc data types protocol informa- tion element mandat- ory/optional value/ value range type name vt_r4 mval, scl m analoguevalue cval.Mag vt_i4 o range range vt_i4 er, ov, time valid- ity m quality q vt_date cp32 m timestamp t o r...
Page 51
Iec103 channel attributes 5.3.3. Table 5.3.3-1 iec103 channel attributes description value or value range/ default name data type: integer access: no limitations the state of the channel - whether it is in use or not. When a channel is not in use, no data can be transmitted on it, and no data is rec...
Page 52
Description value or value range/ default name incremented each time a telegram is received by the iec103 opc server from the iec103 channel. Received telegrams incremented each time a parity error is detected in a message received from the iec103 channel. Parity errors incremented each time an over...
Page 53: Status Codes
Description value or value range/ default name data type: integer access: no limitations indicates the detailed information about the station device status. Writing to the os attribute (os = 1) of a device makes the protocol stack to re-transmit the last system message caused by the device. Possible...
Page 54
Message buffer full. The value of the message length parameter may be too small. 13857 message filling error. The value of the message length parameter may be too small. 13858 device suspended. The reason could be that the link is not properly established (for example, incorrect communication cable ...
Page 55: Appendix 1
Appendix 1 interoperability list for iec103 opc master not supported supported supported, may need additional configuring physical layer electrical interface eia rs-485 number of loads.......................For one protection equipment rs-232 eia rs-485 standard defines unit loads so that 32 of them...
Page 56
Mode 1 (the least significant octet first), as defined in clause 4.10 of iec 870-5-4, is used exclusively in this companion standard. Common address of asdu (system-specific parameter) one common address of asdu (identical with station address) more than one common address of asdu selection of stand...
Page 57
Phase sequence supervision trip circuit supervision i>> backup operation vt fuse failure teleprotection disturbed group warning group alarm earth fault indications in monitor direction earth fault l 1 earth fault l 2 earth fault l 3 earth fault forward, i.E. Line earth fault reverse, i.E. Busbar fau...
Page 58
Breaker failure trip measuring system l 1 trip measuring system l 2 trip measuring system l 3 trip measuring system e trip i> trip i>> trip in> trip in>> auto-reclosure indications in monitor direction cb 'on' by ar cb 'on' by long-time ar ar blocked measurands in monitor direction measurand i measu...
Page 59
General commands in control direction auto-recloser on/off teleprotection on/off protection on/off led reset activate characteristic 1 activate characteristic 2 activate characteristic 3 activate characteristic 4 generic functions in control direction read headings of all the defined groups read val...
Page 60
Current l 2 current l 3 voltage l 1-e voltage l 2-e voltage l 3-e active power p reactive power q frequency f voltage l 1 - l 2 60 1mrs752278 com600 series, version 5.0 iec 60870-5-103 master (opc) user's manual.
Page 61: Index
Index a adding channel object ................................................................................................ 19 data object ..................................................................................................... 20 device object ..........................................
Page 62
Diagnostics ..................................................................................................... 43 delta (del) iec 61850 data modeling ................................................................................ 48 properties .......................................................
Page 63
Protection activation information (acd) ............................................................ 46 protection activation information (act) ............................................................ 46 single point status (sps) .....................................................................
Page 64
Logical node name plate (lpl) ........................................................................ 30 measured value (mv) ...................................................................................... 31 opc server ............................................................................
Page 68
— abb oy medium voltage products p.O. Box 699 fi-65101 vaasa, finland tel. +358 10 22 11 fax. +358 10 224 1094 abb inc. Medium voltage products 655 century point lake mary, fl 32746, usa tel: +1 407 732 2000 fax: +1 407 732 2335 www.Abb.Com/medium-voltage 1mrs752278 l/24.5.2017 © copyright 2017 abb....