Abrelex EnerSolis ES 10000 User Manual - page 2
2
1 Foreword
Thank you for purchasing the EnerSolis ES 6000(ES 8000/ES
10000/ES 12000) Grid Tie Solar Inverter. Many years of experience
in the design of power devices have gone into the construction of
this device. We hope that it will give your solar power system many
years of trouble-free operation. However, the inverter is a complex
electronic system which is confronted with a wide variety of local
conditions, so if questions arise or a malfunction occurs do not
hesitate to call your specialized dealer for assistance.
Please read this user's guide carefully to familiarize yourself with the
device, paying special attention to the information on installing and
commissioning the device.
3
2 IMPORTANT SAFETY INSTRUCTIONS
■
General
This manual contains important instructions for the ES
6000(ES 8000/ES 10000/ES 12000) that must be followed
during installation and maintenance of the inverter.
■
Housing
Only qualified installers are authorized to open the
connection area. Do not open the connection area when
the inverter is connected to power.
Only well-trained service staff may open the upper
portion (power stage) of the inverter, and only when it is
not connected to power.
Warning! Incorrect operation and work performed
incorrectly can cause damage and serious injury! Only
qualified staff are authorized to install your inverter, and
only within the scope of the respective technical
regulations. Do not start operation or carry out
maintenance work before you have read the chapter
“Safety Regulations“!
Warning! These servicing instructions are for use by
qualified personnel only. To reduce the risk of electric
shock, do not perform any servicing other than that
specified in the operating instructions unless you are
qualified to do so.