Accu-Steam EG24A Installation & Operator's Manual - Installation
Accu-Steam™ G2 Electric Installation and Operators Manual
MP5018-1702
PAGE 16
INSTALLATION
TABLE TOP/STAND MODEL
TOOLS REQUIRED:
Spirit Level
Weighted Temperature Probe
Phillips Screw Driver
Digital Temperature Meter
Digital Volt Meter
Digital Clamp Amp Meter
LOCATION AND PLACEMENT
The ACCU-STEAM™ electric griddle has been
designed to be placed on a commercial kitchen
counter-top, an AccuTemp griddle stand or
directly onto any flat, level surface that will
support the appliance weight.
The operating temperature ranges from 200°-
400°F (93°- 204°C). Since these temperatures
can also be found on surfaces around the
perimeter of this appliance, care should be
given not to install next to or against, objects or
surfaces with a low melting or flash point.
LEVELING
The appliance must be installed in a level
condition. An out-of-level condition may cause
uneven temperatures and in a severe out of level
condition damage to the appliance can occur.
Use a spirit level resting on the appliance cooking
surface to ensure it is level front-to-back and left-
to-right.
TABLE TOP
Install the (4) rubber foot tips provided with your
commercial appliance onto the four foot adjusters
of each of the appliance legs. This will keep the
appliance from sliding on the counter-top under
normal use. Once the rubber foot tips have been
IN-FIELD MODIFICATIONS
This appliance has a totally unique design and
is constructed unlike any other appliance on the
market today. Any modification may permanently
damage the appliance.
CAUTION
T
his appliance is heavy. For safe handling, the
installer should obtain help as needed or employ
appropriate material handling equipment to remove
the appliance from the skid and move into the final
destination.
WARNING
Only a qualified service or electrician should
complete the installation to ensure that all
electrical and safety requirements are met and
that all wiring is installed as per all current
National, State and Local electrical codes.
WARNING
A
ny in field modifications that bypasses the safety
features could result in injury or death.
WARNING
Improper installation, alteration, adjustment,
service, cleaning or maintenance of this appliance
could result in property damage, serious injury or
death.
Read and understand the installation, operational
and maintenance instructions before installing,
servicing, or operating this appliance.
WARNING
Always disconnect from power source before
cleaning or servicing.
WARNING