AccuBANKER AB6000 User manual - Getting Started
0
1
1
2
2
3
3
4
4
5
5
Getting Started
WARNING: BEFORE DOING ANY CLEANING, TURN THE POWER SWITCH OFF AND DISCONNECT THE
POWER CORD FROM THE MACHINE. KEEP IN MIND THAT PROBLEMS OR DEFECTS THAT ARISE FROM
LACK OF PERIODIC MAINTENANCE ARE NOT COVERED BY THE WARRANTY
10
Cleaning and Maintenance
Cleaning and Maintenance
A) Verifying the Hopper Adjustment Screw
The bill thickness adjustment wheel has been
factory set and tested to ensure proper feeding
of the bills. However, when the unit presents
recurrent “chain” and “double” note errors, and
these are not due to the condition of the
counted bills, it may be necessary to adjust or
recalibrate this feeding setting.
To adjust the feeding function:
if the bills
cannot be counted smoothly, turn the screw
clockwise to increase the loading height. If the
unit displays the “chain” and “double” note
message, turn the screw counterclockwise to
reduce the loading height until a smooth
feeding is achieved.
Hopper
Adjustment
Screw
0
1
1
2
2
3
3
4
4
5
5