AccuBANKER AB6000 User manual - Troubleshooting
Troubleshooting
25
4.1 Avoiding Problems
Pre-select the bills you are going to count in the machine. Do not attempt to count bills:
With staples or clips
Torn or washed
Profusely stained
Covered with adhesive media
4.2 Jamming
Before you start operating the machine, make sure that there are no foreign elements (such
as silica bags) obstructing the moving parts of the unit.
Verify proper placement of the bills in the hopper.
If jamming occurs, turn the machine OFF. Carefully, remove -with a wood piece or
a pencil- the bills stuck in the system.
Check for proper tightness of the Hopper Adjustment Screw (see page 10) at the top of
the unit. Resume counting.
4.3 When Counting Numbers are Wrong
Turn the Hopper Adjustment Screw (see page 10) at the top of the unit.
Contact Accubanker Support.
4.4 Additional Recommendation
The AB6000 should never be placed under intense light sources. The sensitivity of
the UV sensors may be affected.
Part Two
4.0 Troubleshooting Operational Problems