AccuBANKER AB6000 User manual - Part One
Part One
19
Width detection. The unit detects the width of the counted bills. If there is a width
difference of 2mm or more between bills, the unit will alert the user. By pressing the
Select button cycle between ON and OFF.
(Automatic/Manual): this refers to the unit counting mode. In the Auto
mode, the unit will count the bills once they are put on the hopper. In the Manual mode,
the unit will count when the user activates the function with the Restart button, only.
By pressing the Select button cycle between Auto and Manual modes.
(Computer): This refers to computer communication. It is necessary to have it ON in
order to use the AccuLOG software. When using the unit without a computer turn this
function OFF. By pressing the Select button cycle between ON and OFF.
This setting regulates the counting speed of the unit. Press the Select button to
cycle thru the four available speed options: 600, 900, 1200 and 1500 bills per minute.
This setting gives the user access to the sensitivity of the detection
systems. To gain access to it, press the Select button once. A password is required. This will
be 111. Once the last “1” digit is entered, the screen will show the current sensitivity
levels as follows:
Double note
Infrared
Ultralviolet
Security thread
Menus and Buttons
Wid:
Auto/Man:
Com:
Speed:
Level
Adjustment:
DN:
IR:
UV:
MT: