AccuBANKER AB6000 User manual - Getting Started
11
Getting Started
Cleaning and Maintenance
e
SEL/D
l
Den
lr
SET/C
0
10
10
1
St r
a t
top
S
B) Cleaning the Optical Sensors
It is important to clean all the sensors in the
unit to avoid any paper particles or dust from
sticking to the light-transmitters/receivers.
This should be done every week, if possible.
The glass surfaces of the sensors may be
wiped with a soft cloth soaked with alcohol.
The graphic on the right shows the
approximate position of the sensors.
C) Emergency Stop Feature
In the event of an emergency, this feature can
be activated manually by depressing the red
Emergency Stop Button located on the upper
right side of the machine. The button has a
red LED indicator when the function is ON.
Once the Emergency Stop feature is activated,
all operations will be canceled. The machine
should be restarted.
D) Additional Recommendations
Avoid operating the machine in a dusty or dirty
room. To guard the machine from the
elements -when not in use-, always keep it
protected with the supplied plastic cover.
Sensors
Emergency
Stop
Button
Sensor