AirCard 800 Series Installation Manual - Removing A Sim Card
AirCard 800 Series Installation Guide
Note: To prevent the SIM from
becoming jammed in the AirCard
modem slot, ensure the edge of
the SIM is smooth before
inserting it. Do not attach labels
to your SIM as this may also
cause it to become jammed.
3.
Locate the thin SIM card slot on the left side of the AirCard
modem PC Card’s antenna end.
4.
Orient the SIM card, as shown in the diagram on the
bottom side of the AirCard modem.
5.
Insert the end of the SIM card into the slot, and gently
push it until it is fully inserted.
Figure 2-1: Inserting the SIM card Into the AirCard modem SIM card slot
Once the SIM card is properly inserted, it should not
extend beyond the end of the card.
Removing a SIM card
To remove the SIM card, you will need a narrow object, such
as a pen or a straightened paper clip, to push into the eject
hole.
1.
Place the AirCard modem on a smooth, hard surface such
as a tabletop.
2.
Position your pen or paper-clip above the eject hole, which
is on the top surface of the AirCard modem housing, just
to the right of the SIM card slot. (See
.)
3.
Press down gently (without excessive force) on the eject
hole. The SIM card should pop out of its slot.
14
2130623