AirCard 800 Series Installation Manual - Installation On Windows Xp,
AirCard 800 Series Installation Guide
Note: Users of Windows 2000
must be logged in with adminis-
trative privileges. Users of
Windows XP may require admin-
istrative privileges.
Note: The installer runs twice—
once to install Watcher and once
to install the Network Adapter
Manager.
Note: Do not forcefully insert the
AirCard modem. This may
damage connector pins. If you
have more than one PC Card
slot, you may obtain better signal
strength using the top slot.
Installation on Windows XP,
2000, and Me
Note: If you are running Windows 98 SE, Me, or 2000, Windows
Installer Redistributable 2.0 must be installed. This is available on the
Microsoft web site,
.
Note: You may require your Windows CD. Ensure you have the CD
before proceeding.
1.
If the AirCard modem CD is not already in your CD-ROM
drive, insert it. The CD should autostart and display a
menu.
If the CD does not autostart, select
Start > Run
and enter
d:\setup.exe
where
d
is the drive letter of your CD-ROM
drive.
2.
From the CD start-up menu, select your language, then
notebook installation
, and then the link under
notebook
software installation
to launch the installer.
3.
Use the
Next
and
Back
buttons to navigate through the
installer.
4.
If the SIM is not already inserted in your AirCard modem,
insert it. (See
.) If the antenna is not yet attached,
attach it. (See
.) With the label facing up, insert the
AirCard modem into your PC Card slot.
Figure 3-1: Inserting the AirCard modem
2130623
18