AirCard 800 Series Installation Manual - page 20
AirCard 800 Series Installation Guide
Note: Your PC must be off
whenever you insert or eject the
AirCard modem.
Note: Do not forcefully insert the
AirCard modem. This may
damage connector pins. If you
have more than one PC Card
slot, you may obtain better signal
strength using the top slot.
Note: Depending on how
Windows NT is configured, the
prompts and windows described
here may not appear in the
precise order indicated. Use
these instructions as a guideline.
Inserting the AirCard modem
1.
Close all Windows programs and turn your PC off.
2.
If the SIM is not inserted in your AirCard modem, insert it.
(See
.) If the antenna is not attached, attach it. (See
.) With the label facing up, insert the AirCard
modem into your PC Card slot:
Figure 3-2: Inserting the AirCard modem
3.
Turn on your PC.
4.
Log on as Administrator.
Installing the network card driver
1.
Open the Control Panel by selecting
Start > Settings >
Control Panel
.
2.
Double-click the Network icon to open the Network
window.
3.
Click the
Adapters
tab in the Network window.
4.
Click the
Add...
button to open the Select Network Adapter
window.
5.
Click the
Have Disk...
button to open the Insert Disk
window.
20
2130623