Antari DNG-200 User Manual - page 7
7. Maintenance of the machine
7-1. Please routinely clean your DNG-200 Low Fog Generator, it will effectively help you to lower the
parts replacing rate or maintenance cost.
7-2. Please do not contaminate fog oil, put the cap on the oil tank at all time and the cap of the fog oil
tank equipped on the machine.
7-3. Prior to the storing of the machine when not in use, please clean it first and to make sure the oil
tank is emptied. Disconnect and store the fog pipe and power cord, store the machine and parts into
the parts tank located in front of the machine. Warm up the machine once a month, it can be
protected from the moisture.
7-4. Please store the machine in a cool area.
8. DNG-200 Low Fog Generator Specifications
Power AC 100~120V/ 50~60Hz AC 220~240V / 50~60Hz
Power Consumption (Compressor) 750 W 600 W
Refrigerant
R-404A, 1.75LB R-404A, 1.75LB
Rated Current 6.7A
3.2A
Start Current 61 A
21 A
Capacity
3200 BTU/ hr 2745 BTU/ hr
Compressor's Breaker 15A 250V
10A 250V
Heater 1450W 2500W
Output 12,000 cu.ft / min
12,000 cu.ft / min
First Heat-Up Time
24 min 12 min
Fog Machine's Breaker 15A 250V
15A 250V
Tank Capacity 10 liters 10 liters
Fluid Consumption Rate
11 min/ liter (High output)
11 min/ liter (High output)
Remote Included
D-20 (LCD Timer Panel Controller; 2 m)
Accessory Included
3m Fog Conducting Hose
Weight
120 Kg
Dimensions (mm)
L 780 W 608 H 686 ( mm )
Liquid Used Antari FLR (Light Fog Liquid) Only
DMX Channel DMX One Channel
Additional information Self Contained Unit-- No CO
2
/ Dry Ice Required
Floor-Mount installations ( 4 wheels)
DNG-200
User Manual
06