AU Tool AVT-3190HD Instruction Manual - page 11
Manual is about: PC/HDTV to Video Scan Converter
of
19
11
Along the right side and bottom of the remote control there are several control
buttons. The functions are:
CONTRAST, BRIGHTNESS,
COLOR & SHARP: These buttons,
allow adjustments to be made to the
labeled signal parameters. Pressing
a button causes the arrow buttons to
become active and those buttons are
used to make the actual adjustments.
V-RESET: Restores Factory default
settings to the Contrast, Brightness,
Color and Sharpness parameters.
NTSC/PAL: Selects the television
standard to use on the unit’s output.
SYS-RESET: Restores Factory
Presets to all parameters. (Overscan,
NTSC, 4:3 Aspect, Signal
Parameters & CV/SV Output.)
COLORBAR: Causes an internally
generated color bar signal to appear
on the unit’s outputs.