AU Tool AVT-3190HD Instruction Manual - page 6
6
3.0 CHECKING PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make certain
the following items are contained in the shipping carton:
1x AVT-3190HD Scan Converter
1x AC Power Adapter
1x HD-15 to HD-15 VGA Cable
1x 3 RCA to 3 RCA Cable
1x RCA to RCA Component Cable
1x S-Video to S-Video Cable
1x IR Remote Control
1x Applications Software CD
1x Operations Manual
Note: Please retain the original packing material should the need ever arise to
return the unit. If you find any items are missing, contact your reseller or AV
Toolbox immediately. Have the Model Number, Serial Number and Invoice
available for reference when you call.
4.0
CONNECTING THE HARDWARE
Please study the drawings below and become familiar with the inputs, outputs
and control locations on the AVT-3190HD.
AVT-3190HD Front Panel
The Power Button switches between “Standby” and “On”. When the unit is turned
on, the LED marked “On” above and slightly to the right of the power switch will
illuminate.
The Square window area to the right of the power switch is the location of the
Infrared sensor used by the remote to control the unit. It must remain unblocked
if the Remote IR unit is used to control the unit.